lkml.org 
[lkml]   [2019]   [Jul]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3] arm64: dts: imx8mq: Init rates and parents configs for clocks
Hi Daniel,

On 2019-07-28 07:12, Daniel Baluta wrote:
> From: Abel Vesa <abel.vesa@nxp.com>
>
> Add the initial configuration for clocks that need default parent and
> rate
> setting. This is based on the vendor tree clock provider parents and
> rates
> configuration except this is doing the setup in dts rather then using
> clock
> consumer API in a clock provider driver.
>
> Note that by adding the initial rate setting for audio_pll1/audio_pll
> setting we need to remove it from imx8mq-librem5-devkit.dts
> imx8mq-librem5-devkit.dts
>
> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>

This works with our board. One small nit below

Tested-by: Angus Ainslie (Purism) <angus@akkea.ca>

> ---
> Changes since v2:
> - set rate for audio_pll1/audio_pll2 in the dtsi file and
> remove the setting from imx8mq-librem5-devkit.dts
>
> .../dts/freescale/imx8mq-librem5-devkit.dts | 5 -----
> arch/arm64/boot/dts/freescale/imx8mq.dtsi | 21 +++++++++++++++++++
> 2 files changed, 21 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> index 683a11035643..c702ccc82867 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> @@ -169,11 +169,6 @@
> };
> };
>
> -&clk {
> - assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>;
> - assigned-clock-rates = <786432000>, <722534400>;
> -};
> -
> &dphy {
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index 02fbd0625318..c67625a881a4 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -494,6 +494,27 @@
> clock-names = "ckil", "osc_25m", "osc_27m",
> "clk_ext1", "clk_ext2",
> "clk_ext3", "clk_ext4";
> + assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1>,
> + <&clk IMX8MQ_AUDIO_PLL1>,
> + <&clk IMX8MQ_AUDIO_PLL2>,
> + <&clk IMX8MQ_CLK_AHB>,
> + <&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
> + <&clk IMX8MQ_CLK_AUDIO_AHB>,
> + <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>,
> + <&clk IMX8MQ_CLK_NOC>;
> + assigned-clock-parents = <0>,
> + <0>,
> + <0>,
> + <&clk IMX8MQ_SYS1_PLL_133M>,
> + <&clk IMX8MQ_SYS1_PLL_266M>,
> + <&clk IMX8MQ_SYS2_PLL_500M>,
> + <&clk IMX8MQ_CLK_27M>,
> + <&clk IMX8MQ_SYS1_PLL_800M>;
> + assigned-clock-rates = <593999999>,
> + <786432000>,
> + <722534400>;
> +
> +

Extra whitespace

Angus

> };
>
> src: reset-controller@30390000 {

\
 
 \ /
  Last update: 2019-07-28 16:55    [W:0.039 / U:9.960 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site