lkml.org 
[lkml]   [2019]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net v2] mvpp2: refactor MTU change code
Date
The MTU change code can call napi_disable() with the device already down,
leading to a deadlock. Also, lot of code is duplicated unnecessarily.

Rework mvpp2_change_mtu() to avoid the deadlock and remove duplicated code.

Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
---
.../net/ethernet/marvell/mvpp2/mvpp2_main.c | 41 ++++++-------------
1 file changed, 13 insertions(+), 28 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index b6591ea0c6d6..68fa2d563f0d 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -3700,6 +3700,7 @@ static int mvpp2_set_mac_address(struct net_device *dev, void *p)
static int mvpp2_change_mtu(struct net_device *dev, int mtu)
{
struct mvpp2_port *port = netdev_priv(dev);
+ bool running = netif_running(dev);
int err;

if (!IS_ALIGNED(MVPP2_RX_PKT_SIZE(mtu), 8)) {
@@ -3708,40 +3709,24 @@ static int mvpp2_change_mtu(struct net_device *dev, int mtu)
mtu = ALIGN(MVPP2_RX_PKT_SIZE(mtu), 8);
}

- if (!netif_running(dev)) {
- err = mvpp2_bm_update_mtu(dev, mtu);
- if (!err) {
- port->pkt_size = MVPP2_RX_PKT_SIZE(mtu);
- return 0;
- }
-
- /* Reconfigure BM to the original MTU */
- err = mvpp2_bm_update_mtu(dev, dev->mtu);
- if (err)
- goto log_error;
- }
-
- mvpp2_stop_dev(port);
+ if (running)
+ mvpp2_stop_dev(port);

err = mvpp2_bm_update_mtu(dev, mtu);
- if (!err) {
+ if (err) {
+ netdev_err(dev, "failed to change MTU\n");
+ /* Reconfigure BM to the original MTU */
+ mvpp2_bm_update_mtu(dev, dev->mtu);
+ } else {
port->pkt_size = MVPP2_RX_PKT_SIZE(mtu);
- goto out_start;
}

- /* Reconfigure BM to the original MTU */
- err = mvpp2_bm_update_mtu(dev, dev->mtu);
- if (err)
- goto log_error;
-
-out_start:
- mvpp2_start_dev(port);
- mvpp2_egress_enable(port);
- mvpp2_ingress_enable(port);
+ if (running) {
+ mvpp2_start_dev(port);
+ mvpp2_egress_enable(port);
+ mvpp2_ingress_enable(port);
+ }

- return 0;
-log_error:
- netdev_err(dev, "failed to change MTU\n");
return err;
}

--
2.21.0
\
 
 \ /
  Last update: 2019-07-28 02:54    [W:0.026 / U:0.964 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site