lkml.org 
[lkml]   [2019]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 3/4] iio: cros_ec_accel_legacy: Use cros_ec_sensors_core
On Tue, 16 Jul 2019 10:46:44 +0200
Enric Balletbo i Serra <enric.balletbo@collabora.com> wrote:

> On 16/7/19 1:14, Gwendal Grignou wrote:
> > Remove duplicate code in cros-ec-accel-legacy,
> > use cros-ec-sensors-core functions and structures when possible.
> >
> > On glimmer, check the 2 accelerometers are presented and working.
> >
> > Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
> > Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
>
> As the mutex problem is fixed:
>
> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
>
Applied,

Thanks,

Jonathan

> > ---
> > drivers/iio/accel/Kconfig | 4 +-
> > drivers/iio/accel/cros_ec_accel_legacy.c | 336 ++++-------------------
> > 2 files changed, 55 insertions(+), 285 deletions(-)
> >
> > diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
> > index 62a970a20219..7d0848f9ea45 100644
> > --- a/drivers/iio/accel/Kconfig
> > +++ b/drivers/iio/accel/Kconfig
> > @@ -201,9 +201,7 @@ config HID_SENSOR_ACCEL_3D
> >
> > config IIO_CROS_EC_ACCEL_LEGACY
> > tristate "ChromeOS EC Legacy Accelerometer Sensor"
> > - select IIO_BUFFER
> > - select IIO_TRIGGERED_BUFFER
> > - select CROS_EC_LPC_REGISTER_DEVICE
> > + depends on IIO_CROS_EC_SENSORS_CORE
> > help
> > Say yes here to get support for accelerometers on Chromebook using
> > legacy EC firmware.
> > diff --git a/drivers/iio/accel/cros_ec_accel_legacy.c b/drivers/iio/accel/cros_ec_accel_legacy.c
> > index ad19d9c716f4..f65578c65a1c 100644
> > --- a/drivers/iio/accel/cros_ec_accel_legacy.c
> > +++ b/drivers/iio/accel/cros_ec_accel_legacy.c
> > @@ -12,6 +12,7 @@
> > #include <linux/delay.h>
> > #include <linux/device.h>
> > #include <linux/iio/buffer.h>
> > +#include <linux/iio/common/cros_ec_sensors_core.h>
> > #include <linux/iio/iio.h>
> > #include <linux/iio/kfifo_buf.h>
> > #include <linux/iio/trigger_consumer.h>
> > @@ -25,191 +26,51 @@
> >
> > #define DRV_NAME "cros-ec-accel-legacy"
> >
> > +#define CROS_EC_SENSOR_LEGACY_NUM 2
> > /*
> > * Sensor scale hard coded at 10 bits per g, computed as:
> > * g / (2^10 - 1) = 0.009586168; with g = 9.80665 m.s^-2
> > */
> > #define ACCEL_LEGACY_NSCALE 9586168
> >
> > -/* Indices for EC sensor values. */
> > -enum {
> > - X,
> > - Y,
> > - Z,
> > - MAX_AXIS,
> > -};
> > -
> > -/* State data for cros_ec_accel_legacy iio driver. */
> > -struct cros_ec_accel_legacy_state {
> > - struct cros_ec_device *ec;
> > -
> > - /*
> > - * Array holding data from a single capture. 2 bytes per channel
> > - * for the 3 channels plus the timestamp which is always last and
> > - * 8-bytes aligned.
> > - */
> > - s16 capture_data[8];
> > - s8 sign[MAX_AXIS];
> > - u8 sensor_num;
> > -};
> > -
> > -static int ec_cmd_read_u8(struct cros_ec_device *ec, unsigned int offset,
> > - u8 *dest)
> > -{
> > - return ec->cmd_readmem(ec, offset, 1, dest);
> > -}
> > -
> > -static int ec_cmd_read_u16(struct cros_ec_device *ec, unsigned int offset,
> > - u16 *dest)
> > -{
> > - __le16 tmp;
> > - int ret = ec->cmd_readmem(ec, offset, 2, &tmp);
> > -
> > - *dest = le16_to_cpu(tmp);
> > -
> > - return ret;
> > -}
> > -
> > -/**
> > - * read_ec_until_not_busy() - Read from EC status byte until it reads not busy.
> > - * @st: Pointer to state information for device.
> > - *
> > - * This function reads EC status until its busy bit gets cleared. It does not
> > - * wait indefinitely and returns -EIO if the EC status is still busy after a
> > - * few hundreds milliseconds.
> > - *
> > - * Return: 8-bit status if ok, -EIO on error
> > - */
> > -static int read_ec_until_not_busy(struct cros_ec_accel_legacy_state *st)
> > -{
> > - struct cros_ec_device *ec = st->ec;
> > - u8 status;
> > - int attempts = 0;
> > -
> > - ec_cmd_read_u8(ec, EC_MEMMAP_ACC_STATUS, &status);
> > - while (status & EC_MEMMAP_ACC_STATUS_BUSY_BIT) {
> > - /* Give up after enough attempts, return error. */
> > - if (attempts++ >= 50)
> > - return -EIO;
> > -
> > - /* Small delay every so often. */
> > - if (attempts % 5 == 0)
> > - msleep(25);
> > -
> > - ec_cmd_read_u8(ec, EC_MEMMAP_ACC_STATUS, &status);
> > - }
> > -
> > - return status;
> > -}
> > -
> > -/**
> > - * read_ec_accel_data_unsafe() - Read acceleration data from EC shared memory.
> > - * @st: Pointer to state information for device.
> > - * @scan_mask: Bitmap of the sensor indices to scan.
> > - * @data: Location to store data.
> > - *
> > - * This is the unsafe function for reading the EC data. It does not guarantee
> > - * that the EC will not modify the data as it is being read in.
> > - */
> > -static void read_ec_accel_data_unsafe(struct cros_ec_accel_legacy_state *st,
> > - unsigned long scan_mask, s16 *data)
> > -{
> > - int i = 0;
> > - int num_enabled = bitmap_weight(&scan_mask, MAX_AXIS);
> > -
> > - /* Read all sensors enabled in scan_mask. Each value is 2 bytes. */
> > - while (num_enabled--) {
> > - i = find_next_bit(&scan_mask, MAX_AXIS, i);
> > - ec_cmd_read_u16(st->ec,
> > - EC_MEMMAP_ACC_DATA +
> > - sizeof(s16) *
> > - (1 + i + st->sensor_num * MAX_AXIS),
> > - data);
> > - *data *= st->sign[i];
> > - i++;
> > - data++;
> > - }
> > -}
> > -
> > -/**
> > - * read_ec_accel_data() - Read acceleration data from EC shared memory.
> > - * @st: Pointer to state information for device.
> > - * @scan_mask: Bitmap of the sensor indices to scan.
> > - * @data: Location to store data.
> > - *
> > - * This is the safe function for reading the EC data. It guarantees that
> > - * the data sampled was not modified by the EC while being read.
> > - *
> > - * Return: 0 if ok, -ve on error
> > - */
> > -static int read_ec_accel_data(struct cros_ec_accel_legacy_state *st,
> > - unsigned long scan_mask, s16 *data)
> > -{
> > - u8 samp_id = 0xff;
> > - u8 status = 0;
> > - int ret;
> > - int attempts = 0;
> > -
> > - /*
> > - * Continually read all data from EC until the status byte after
> > - * all reads reflects that the EC is not busy and the sample id
> > - * matches the sample id from before all reads. This guarantees
> > - * that data read in was not modified by the EC while reading.
> > - */
> > - while ((status & (EC_MEMMAP_ACC_STATUS_BUSY_BIT |
> > - EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK)) != samp_id) {
> > - /* If we have tried to read too many times, return error. */
> > - if (attempts++ >= 5)
> > - return -EIO;
> > -
> > - /* Read status byte until EC is not busy. */
> > - ret = read_ec_until_not_busy(st);
> > - if (ret < 0)
> > - return ret;
> > - status = ret;
> > -
> > - /*
> > - * Store the current sample id so that we can compare to the
> > - * sample id after reading the data.
> > - */
> > - samp_id = status & EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK;
> > -
> > - /* Read all EC data, format it, and store it into data. */
> > - read_ec_accel_data_unsafe(st, scan_mask, data);
> > -
> > - /* Read status byte. */
> > - ec_cmd_read_u8(st->ec, EC_MEMMAP_ACC_STATUS, &status);
> > - }
> > -
> > - return 0;
> > -}
> > -
> > static int cros_ec_accel_legacy_read(struct iio_dev *indio_dev,
> > struct iio_chan_spec const *chan,
> > int *val, int *val2, long mask)
> > {
> > - struct cros_ec_accel_legacy_state *st = iio_priv(indio_dev);
> > + struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
> > s16 data = 0;
> > - int ret = IIO_VAL_INT;
> > + int ret;
> > + int idx = chan->scan_index;
> > +
> > + mutex_lock(&st->cmd_lock);
> >
> > switch (mask) {
> > case IIO_CHAN_INFO_RAW:
> > - ret = read_ec_accel_data(st, (1 << chan->scan_index), &data);
> > - if (ret)
> > - return ret;
> > + ret = st->read_ec_sensors_data(indio_dev, 1 << idx, &data);
> > + if (ret < 0)
> > + break;
> > + ret = IIO_VAL_INT;
> > *val = data;
> > - return IIO_VAL_INT;
> > + break;
> > case IIO_CHAN_INFO_SCALE:
> > + WARN_ON(st->type != MOTIONSENSE_TYPE_ACCEL);
> > *val = 0;
> > *val2 = ACCEL_LEGACY_NSCALE;
> > - return IIO_VAL_INT_PLUS_NANO;
> > + ret = IIO_VAL_INT_PLUS_NANO;
> > + break;
> > case IIO_CHAN_INFO_CALIBBIAS:
> > /* Calibration not supported. */
> > *val = 0;
> > - return IIO_VAL_INT;
> > + ret = IIO_VAL_INT;
> > + break;
> > default:
> > - return -EINVAL;
> > + ret = cros_ec_sensors_core_read(st, chan, val, val2,
> > + mask);
> > + break;
> > }
> > + mutex_unlock(&st->cmd_lock);
> > +
> > + return ret;
> > }
> >
> > static int cros_ec_accel_legacy_write(struct iio_dev *indio_dev,
> > @@ -231,86 +92,14 @@ static const struct iio_info cros_ec_accel_legacy_info = {
> > .write_raw = &cros_ec_accel_legacy_write,
> > };
> >
> > -/**
> > - * cros_ec_accel_legacy_capture() - The trigger handler function
> > - * @irq: The interrupt number.
> > - * @p: Private data - always a pointer to the poll func.
> > - *
> > - * On a trigger event occurring, if the pollfunc is attached then this
> > - * handler is called as a threaded interrupt (and hence may sleep). It
> > - * is responsible for grabbing data from the device and pushing it into
> > - * the associated buffer.
> > - *
> > - * Return: IRQ_HANDLED
> > +/*
> > + * Present the channel using HTML5 standard:
> > + * need to invert X and Y and invert some lid axis.
> > */
> > -static irqreturn_t cros_ec_accel_legacy_capture(int irq, void *p)
> > -{
> > - struct iio_poll_func *pf = p;
> > - struct iio_dev *indio_dev = pf->indio_dev;
> > - struct cros_ec_accel_legacy_state *st = iio_priv(indio_dev);
> > -
> > - /* Clear capture data. */
> > - memset(st->capture_data, 0, sizeof(st->capture_data));
> > -
> > - /*
> > - * Read data based on which channels are enabled in scan mask. Note
> > - * that on a capture we are always reading the calibrated data.
> > - */
> > - read_ec_accel_data(st, *indio_dev->active_scan_mask, st->capture_data);
> > -
> > - iio_push_to_buffers_with_timestamp(indio_dev, (void *)st->capture_data,
> > - iio_get_time_ns(indio_dev));
> > -
> > - /*
> > - * Tell the core we are done with this trigger and ready for the
> > - * next one.
> > - */
> > - iio_trigger_notify_done(indio_dev->trig);
> > -
> > - return IRQ_HANDLED;
> > -}
> > -
> > -static char *cros_ec_accel_legacy_loc_strings[] = {
> > - [MOTIONSENSE_LOC_BASE] = "base",
> > - [MOTIONSENSE_LOC_LID] = "lid",
> > - [MOTIONSENSE_LOC_MAX] = "unknown",
> > -};
> > -
> > -static ssize_t cros_ec_accel_legacy_loc(struct iio_dev *indio_dev,
> > - uintptr_t private,
> > - const struct iio_chan_spec *chan,
> > - char *buf)
> > -{
> > - struct cros_ec_accel_legacy_state *st = iio_priv(indio_dev);
> > -
> > - return sprintf(buf, "%s\n",
> > - cros_ec_accel_legacy_loc_strings[st->sensor_num +
> > - MOTIONSENSE_LOC_BASE]);
> > -}
> > -
> > -static ssize_t cros_ec_accel_legacy_id(struct iio_dev *indio_dev,
> > - uintptr_t private,
> > - const struct iio_chan_spec *chan,
> > - char *buf)
> > -{
> > - struct cros_ec_accel_legacy_state *st = iio_priv(indio_dev);
> > -
> > - return sprintf(buf, "%d\n", st->sensor_num);
> > -}
> > -
> > -static const struct iio_chan_spec_ext_info cros_ec_accel_legacy_ext_info[] = {
> > - {
> > - .name = "id",
> > - .shared = IIO_SHARED_BY_ALL,
> > - .read = cros_ec_accel_legacy_id,
> > - },
> > - {
> > - .name = "location",
> > - .shared = IIO_SHARED_BY_ALL,
> > - .read = cros_ec_accel_legacy_loc,
> > - },
> > - { }
> > -};
> > +#define CROS_EC_ACCEL_ROTATE_AXIS(_axis) \
> > + ((_axis) == CROS_EC_SENSOR_Z ? CROS_EC_SENSOR_Z : \
> > + ((_axis) == CROS_EC_SENSOR_X ? CROS_EC_SENSOR_Y : \
> > + CROS_EC_SENSOR_X))
> >
> > #define CROS_EC_ACCEL_LEGACY_CHAN(_axis) \
> > { \
> > @@ -321,28 +110,28 @@ static const struct iio_chan_spec_ext_info cros_ec_accel_legacy_ext_info[] = {
> > BIT(IIO_CHAN_INFO_RAW) | \
> > BIT(IIO_CHAN_INFO_CALIBBIAS), \
> > .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SCALE), \
> > - .ext_info = cros_ec_accel_legacy_ext_info, \
> > + .ext_info = cros_ec_sensors_ext_info, \
> > .scan_type = { \
> > .sign = 's', \
> > - .realbits = 16, \
> > - .storagebits = 16, \
> > + .realbits = CROS_EC_SENSOR_BITS, \
> > + .storagebits = CROS_EC_SENSOR_BITS, \
> > }, \
> > + .scan_index = CROS_EC_ACCEL_ROTATE_AXIS(_axis), \
> > } \
> >
> > -static struct iio_chan_spec ec_accel_channels[] = {
> > - CROS_EC_ACCEL_LEGACY_CHAN(X),
> > - CROS_EC_ACCEL_LEGACY_CHAN(Y),
> > - CROS_EC_ACCEL_LEGACY_CHAN(Z),
> > - IIO_CHAN_SOFT_TIMESTAMP(MAX_AXIS)
> > +static const struct iio_chan_spec cros_ec_accel_legacy_channels[] = {
> > + CROS_EC_ACCEL_LEGACY_CHAN(CROS_EC_SENSOR_X),
> > + CROS_EC_ACCEL_LEGACY_CHAN(CROS_EC_SENSOR_Y),
> > + CROS_EC_ACCEL_LEGACY_CHAN(CROS_EC_SENSOR_Z),
> > + IIO_CHAN_SOFT_TIMESTAMP(CROS_EC_SENSOR_MAX_AXIS)
> > };
> >
> > static int cros_ec_accel_legacy_probe(struct platform_device *pdev)
> > {
> > struct device *dev = &pdev->dev;
> > struct cros_ec_dev *ec = dev_get_drvdata(dev->parent);
> > - struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev);
> > struct iio_dev *indio_dev;
> > - struct cros_ec_accel_legacy_state *state;
> > + struct cros_ec_sensors_core_state *state;
> > int ret;
> >
> > if (!ec || !ec->ec_dev) {
> > @@ -350,46 +139,29 @@ static int cros_ec_accel_legacy_probe(struct platform_device *pdev)
> > return -EINVAL;
> > }
> >
> > - if (!ec->ec_dev->cmd_readmem) {
> > - dev_warn(&pdev->dev, "EC does not support direct reads.\n");
> > - return -EINVAL;
> > - }
> > -
> > indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*state));
> > if (!indio_dev)
> > return -ENOMEM;
> >
> > - platform_set_drvdata(pdev, indio_dev);
> > - state = iio_priv(indio_dev);
> > - state->ec = ec->ec_dev;
> > - state->sensor_num = sensor_platform->sensor_num;
> > -
> > - indio_dev->dev.parent = dev;
> > - indio_dev->name = pdev->name;
> > - indio_dev->channels = ec_accel_channels;
> > - /*
> > - * Present the channel using HTML5 standard:
> > - * need to invert X and Y and invert some lid axis.
> > - */
> > - ec_accel_channels[X].scan_index = Y;
> > - ec_accel_channels[Y].scan_index = X;
> > - ec_accel_channels[Z].scan_index = Z;
> > + ret = cros_ec_sensors_core_init(pdev, indio_dev, true);
> > + if (ret)
> > + return ret;
> >
> > - state->sign[Y] = 1;
> > + indio_dev->info = &cros_ec_accel_legacy_info;
> > + state = iio_priv(indio_dev);
> >
> > - if (state->sensor_num == MOTIONSENSE_LOC_LID)
> > - state->sign[X] = state->sign[Z] = -1;
> > - else
> > - state->sign[X] = state->sign[Z] = 1;
> > + state->read_ec_sensors_data = cros_ec_sensors_read_lpc;
> >
> > - indio_dev->num_channels = ARRAY_SIZE(ec_accel_channels);
> > - indio_dev->dev.parent = &pdev->dev;
> > - indio_dev->info = &cros_ec_accel_legacy_info;
> > - indio_dev->modes = INDIO_DIRECT_MODE;
> > + indio_dev->channels = cros_ec_accel_legacy_channels;
> > + indio_dev->num_channels = ARRAY_SIZE(cros_ec_accel_legacy_channels);
> > + /* The lid sensor needs to be presented inverted. */
> > + if (state->loc == MOTIONSENSE_LOC_LID) {
> > + state->sign[CROS_EC_SENSOR_X] = -1;
> > + state->sign[CROS_EC_SENSOR_Z] = -1;
> > + }
> >
> > ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
> > - cros_ec_accel_legacy_capture,
> > - NULL);
> > + cros_ec_sensors_capture, NULL);
> > if (ret)
> > return ret;
> >
> >

\
 
 \ /
  Last update: 2019-07-28 00:14    [W:0.050 / U:13.940 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site