lkml.org 
[lkml]   [2019]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/5] MIPS: dts: lantiq: danube: easy50712: route the PCI_INTA IRQ through EBU
Date
EBU provides an interrupt line for the PCI_INTA interrupt. Route
easy50712's PCI interrupt to EBU so the interrupt line is configured
correctly (using IRQ_TYPE_LEVEL_LOW, this was previously hardcoded in
the PCI driver) and ACKed properly.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
arch/mips/boot/dts/lantiq/easy50712.dts | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/mips/boot/dts/lantiq/easy50712.dts b/arch/mips/boot/dts/lantiq/easy50712.dts
index 1ce20b7d05cb..33c26b93cfc9 100644
--- a/arch/mips/boot/dts/lantiq/easy50712.dts
+++ b/arch/mips/boot/dts/lantiq/easy50712.dts
@@ -1,6 +1,8 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;

+#include <dt-bindings/interrupt-controller/irq.h>
+
/include/ "danube.dtsi"

/ {
@@ -105,7 +107,7 @@
lantiq,bus-clock = <33333333>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
- 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
+ 0x7000 0 0 1 &ebu0 0 IRQ_TYPE_LEVEL_LOW // slot 14
>;
gpios-reset = <&gpio 21 0>;
req-mask = <0x1>; /* GNT1 */
--
2.22.0
\
 
 \ /
  Last update: 2019-07-27 19:54    [W:0.059 / U:13.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site