lkml.org 
[lkml]   [2019]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 5/6] pwm: sun4i: Add support to output source clock directly
Date
Dne sobota, 27. julij 2019 ob 12:50:08 CEST je Maxime Ripard napisal(a):
> On Fri, Jul 26, 2019 at 08:40:44PM +0200, Jernej Skrabec wrote:
> > PWM core has an option to bypass whole logic and output unchanged source
> > clock as PWM output. This is achieved by enabling bypass bit.
> >
> > Note that when bypass is enabled, no other setting has any meaning, not
> > even enable bit.
> >
> > This mode of operation is needed to achieve high enough frequency to
> > serve as clock source for AC200 chip, which is integrated into same
> > package as H6 SoC.
> >
> > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
>
> It doesn't seem to be available on the A10 (at least) though. The A13
> seem to have it, so you should probably check that, and make that
> conditional to the compatible if not available on all of them.

Ok, can you suggest the name for the quirk? "has_bypass" is suspiciously
similar to "has_prescaler_bypass".

Also, how to name these sun4i_pwm_data structures? Now that there are (will
be) three new quirks, name of the structure would be just too long, like
"sun50i_pwm_dual_prescaler_bypass_clk_rst_bypass".

Best regards,
Jernej

>
> Maxime
>
> --
> Maxime Ripard, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com




\
 
 \ /
  Last update: 2019-07-27 16:29    [W:0.065 / U:0.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site