lkml.org 
[lkml]   [2019]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/6] spi: sprd: adi: Change hwlock to be optional
Date
Now Spreadtrum ADI controller supplies multiple master accessing channel
to support multiple subsystems accessing, instead of using a hardware
spinlock to synchronize between the multiple subsystems.

To keep backward compatibility, we should change the hardware spinlock
to be optional. Moreover change to use of_hwspin_lock_get_id() function
which return -ENOENT error number to indicate no hwlock support.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
drivers/spi/spi-sprd-adi.c | 68 +++++++++++++++++++++++++++-----------------
1 file changed, 42 insertions(+), 26 deletions(-)

diff --git a/drivers/spi/spi-sprd-adi.c b/drivers/spi/spi-sprd-adi.c
index 0d767eb..9a05128 100644
--- a/drivers/spi/spi-sprd-adi.c
+++ b/drivers/spi/spi-sprd-adi.c
@@ -165,14 +165,16 @@ static int sprd_adi_read(struct sprd_adi *sadi, u32 reg_paddr, u32 *read_val)
int read_timeout = ADI_READ_TIMEOUT;
unsigned long flags;
u32 val, rd_addr;
- int ret;
-
- ret = hwspin_lock_timeout_irqsave(sadi->hwlock,
- ADI_HWSPINLOCK_TIMEOUT,
- &flags);
- if (ret) {
- dev_err(sadi->dev, "get the hw lock failed\n");
- return ret;
+ int ret = 0;
+
+ if (sadi->hwlock) {
+ ret = hwspin_lock_timeout_irqsave(sadi->hwlock,
+ ADI_HWSPINLOCK_TIMEOUT,
+ &flags);
+ if (ret) {
+ dev_err(sadi->dev, "get the hw lock failed\n");
+ return ret;
+ }
}

/*
@@ -219,7 +221,8 @@ static int sprd_adi_read(struct sprd_adi *sadi, u32 reg_paddr, u32 *read_val)
*read_val = val & RD_VALUE_MASK;

out:
- hwspin_unlock_irqrestore(sadi->hwlock, &flags);
+ if (sadi->hwlock)
+ hwspin_unlock_irqrestore(sadi->hwlock, &flags);
return ret;
}

@@ -230,12 +233,14 @@ static int sprd_adi_write(struct sprd_adi *sadi, u32 reg_paddr, u32 val)
unsigned long flags;
int ret;

- ret = hwspin_lock_timeout_irqsave(sadi->hwlock,
- ADI_HWSPINLOCK_TIMEOUT,
- &flags);
- if (ret) {
- dev_err(sadi->dev, "get the hw lock failed\n");
- return ret;
+ if (sadi->hwlock) {
+ ret = hwspin_lock_timeout_irqsave(sadi->hwlock,
+ ADI_HWSPINLOCK_TIMEOUT,
+ &flags);
+ if (ret) {
+ dev_err(sadi->dev, "get the hw lock failed\n");
+ return ret;
+ }
}

ret = sprd_adi_drain_fifo(sadi);
@@ -261,7 +266,8 @@ static int sprd_adi_write(struct sprd_adi *sadi, u32 reg_paddr, u32 val)
}

out:
- hwspin_unlock_irqrestore(sadi->hwlock, &flags);
+ if (sadi->hwlock)
+ hwspin_unlock_irqrestore(sadi->hwlock, &flags);
return ret;
}

@@ -476,16 +482,26 @@ static int sprd_adi_probe(struct platform_device *pdev)
sadi->slave_pbase = res->start + ADI_SLAVE_OFFSET;
sadi->ctlr = ctlr;
sadi->dev = &pdev->dev;
- ret = of_hwspin_lock_get_id_byname(np, "adi");
- if (ret < 0) {
- dev_err(&pdev->dev, "can not get the hardware spinlock\n");
- goto put_ctlr;
- }
-
- sadi->hwlock = devm_hwspin_lock_request_specific(&pdev->dev, ret);
- if (!sadi->hwlock) {
- ret = -ENXIO;
- goto put_ctlr;
+ ret = of_hwspin_lock_get_id(np, 0);
+ if (ret > 0 || (IS_ENABLED(CONFIG_HWSPINLOCK) && ret == 0)) {
+ sadi->hwlock =
+ devm_hwspin_lock_request_specific(&pdev->dev, ret);
+ if (!sadi->hwlock) {
+ ret = -ENXIO;
+ goto put_ctlr;
+ }
+ } else {
+ switch (ret) {
+ case -ENOENT:
+ dev_info(&pdev->dev, "no hardware spinlock supplied\n");
+ break;
+ default:
+ dev_err(&pdev->dev,
+ "failed to find hwlock id, %d\n", ret);
+ /* fall-through */
+ case -EPROBE_DEFER:
+ goto put_ctlr;
+ }
}

sprd_adi_hw_init(sadi);
--
1.7.9.5
\
 
 \ /
  Last update: 2019-07-26 09:23    [W:0.069 / U:6.976 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site