lkml.org 
[lkml]   [2019]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/1] drm/mxsfb: Read bus flags from bridge if present
On 2019-07-26 11:49, Guido Günther wrote:
> The bridge might have special requirmentes on the input bus. This
> is e.g. used by the imx-nwl bridge.
>
> Signed-off-by: Guido Günther <agx@sigxcpu.org>

Looks good to me.

Reviewed-by: Stefan Agner <stefan@agner.ch>


That is similar to what I sent for the imx DRM driver:

https://lkml.org/lkml/2018/9/12/913

I probably should follow up on that patchset.

--
Stefan

> ---
> drivers/gpu/drm/mxsfb/mxsfb_crtc.c | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
> b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
> index e84bac3a541d..3b8eb3ac13b6 100644
> --- a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
> +++ b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
> @@ -215,7 +215,7 @@ static void mxsfb_crtc_mode_set_nofb(struct
> mxsfb_drm_private *mxsfb)
> {
> struct drm_device *drm = mxsfb->pipe.crtc.dev;
> struct drm_display_mode *m = &mxsfb->pipe.crtc.state->adjusted_mode;
> - const u32 bus_flags = mxsfb->connector->display_info.bus_flags;
> + u32 bus_flags = mxsfb->connector->display_info.bus_flags;
> u32 vdctrl0, vsync_pulse_len, hsync_pulse_len;
> int err;
>
> @@ -239,6 +239,9 @@ static void mxsfb_crtc_mode_set_nofb(struct
> mxsfb_drm_private *mxsfb)
>
> clk_set_rate(mxsfb->clk, m->crtc_clock * 1000);
>
> + if (mxsfb->bridge && mxsfb->bridge->timings)
> + bus_flags = mxsfb->bridge->timings->input_bus_flags;
> +
> DRM_DEV_DEBUG_DRIVER(drm->dev, "Pixel clock: %dkHz (actual: %dkHz)\n",
> m->crtc_clock,
> (int)(clk_get_rate(mxsfb->clk) / 1000));

\
 
 \ /
  Last update: 2019-07-26 13:01    [W:0.031 / U:11.872 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site