[lkml]   [2019]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH 0/3] drm/panel: jh057n00900: Move dsi init sequence to prepare
If the panel is wrapped in a panel_bridge it gets prepar()ed before the
upstream DSI bridge which can cause hangs (e.g. with imx-nwl since clocks
are not enabled yet). To avoid this move the panel's first DSI access to
enable() so the upstream bridge can prepare the DSI host controller in
it's pre_enable().

The second patch makes the disable() call symmetric to the above and the third
one just eases debugging.

Guido Günther (3):
drm/panel: jh057n00900: Move panel DSI init to enable()
drm/panel: jh057n00900: Move mipi_dsi_dcs_set_display_off to disable()
drm/panel: jh057n00900: Print error code on all DRM_DEV_ERROR()s

.../drm/panel/panel-rocktech-jh057n00900.c | 31 ++++++++++++-------
1 file changed, 19 insertions(+), 12 deletions(-)


 \ /
  Last update: 2019-07-26 11:22    [W:0.048 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site