lkml.org 
[lkml]   [2019]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 0/4] regulator: add support for the STM32 ADC booster
From
Date
Hi Fabrice

On 7/1/19 10:14 AM, Fabrice Gasnier wrote:
> Add support for the 3.3V booster regulator embedded in stm32h7 and stm32mp1
> devices, that can be used to supply ADC analog input switches.
> It's useful to reach full ADC performance when their supply is below 2.7V
> (vdda by default).
>
> Changes in v2:
> - rebase on top of for-next branch
>
> Fabrice Gasnier (4):
> dt-bindings: regulator: add support for the stm32-booster
> regulator: add support for the stm32-booster
> ARM: multi_v7_defconfig: enable STM32 booster regulator
> ARM: dts: stm32: add booster for ADC analog switches on stm32mp157c
>
> .../bindings/regulator/st,stm32-booster.txt | 18 +++
> arch/arm/boot/dts/stm32mp157c.dtsi | 6 +
> arch/arm/configs/multi_v7_defconfig | 1 +
> drivers/regulator/Kconfig | 11 ++
> drivers/regulator/Makefile | 1 +
> drivers/regulator/stm32-booster.c | 132 +++++++++++++++++++++
> 6 files changed, 169 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/regulator/st,stm32-booster.txt
> create mode 100644 drivers/regulator/stm32-booster.c
>

DT patch + config applied in stm32-next.

regards
alex

\
 
 \ /
  Last update: 2019-07-26 18:23    [W:0.058 / U:1.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site