lkml.org 
[lkml]   [2019]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 194/271] arm64: tegra: Update Jetson TX1 GPU regulator timings
Date
From: Jon Hunter <jonathanh@nvidia.com>

commit ece6031ece2dd64d63708cfe1088016cee5b10c0 upstream.

The GPU regulator enable ramp delay for Jetson TX1 is set to 1ms which
not sufficient because the enable ramp delay has been measured to be
greater than 1ms. Furthermore, the downstream kernels released by NVIDIA
for Jetson TX1 are using a enable ramp delay 2ms and a settling delay of
160us. Update the GPU regulator enable ramp delay for Jetson TX1 to be
2ms and add a settling delay of 160us.

Cc: stable@vger.kernel.org
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Fixes: 5e6b9a89afce ("arm64: tegra: Add VDD_GPU regulator to Jetson TX1")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
@@ -330,7 +330,8 @@
regulator-max-microvolt = <1320000>;
enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
regulator-ramp-delay = <80>;
- regulator-enable-ramp-delay = <1000>;
+ regulator-enable-ramp-delay = <2000>;
+ regulator-settling-time-us = <160>;
};
};
};

\
 
 \ /
  Last update: 2019-07-25 07:45    [W:0.800 / U:9.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site