lkml.org 
[lkml]   [2019]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 02/11] MIPS: qi_lb60: Migrate to devicetree


Le jeu. 25 juil. 2019 à 19:47, Paul Burton <paul.burton@mips.com> a
écrit :
> Hi Paul,
>
> On Thu, Jul 25, 2019 at 06:02:06PM -0400, Paul Cercueil wrote:
>> Move all the platform data to devicetree.
>
> Nice! :)
>
>> The only bit dropped is the PWM beeper, which requires the PWM
>> driver
>> to be updated. I figured it's okay to remove it here since it's
>> really
>> a non-critical device, and it'll be re-introduced soon enough.
>
> OK, I can see that being a price worth paying. Though it's possible to
> include the binding at least for that in this series I'd be even
> happier. Actually I see we already have
>
> Documentation/devicetree/bindings/pwm/ingenic,jz47xx-pwm.txt
>
> in mainline - what needs to change with it?

The PWM driver will be updated to use the TCU clocks and the regmap
provided
by the TCU driver. The PWM node will be a sub-node of the TCU one.

Additionally, there is this[1] ongoing discussion about PWM which makes
me uneasy about how to write the binding. So I'd rather not rush it,
because once the devicetree is written, it's ABI.

[1]: https://lkml.org/lkml/2019/5/22/607


>> + spi {
>> + compatible = "spi-gpio";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + sck-gpios = <&gpc 23 GPIO_ACTIVE_HIGH>;
>> + mosi-gpios = <&gpc 22 GPIO_ACTIVE_HIGH>;
>> + cs-gpios = <&gpc 21 GPIO_ACTIVE_LOW>;
>> + num-chipselects = <1>;
>> +
>> + spi@0 {
>> + compatible = "ili8960";
>
> Should this be "ilitek,ili8960"?
>
> Is there a binding & driver for this submitted somewhere? If not then
> do
> we need this at all? It doesn't look like the existing platform data
> would actually lead to a driver being loaded so I'm wondering if we
> can
> just drop this until such a driver (or at least a documented DT
> binding)
> exists.

I can drop it. There is no driver for it, and I'm not even sure the LB60
has a ILI8960 in the first place.


> Thanks,
> Paul


\
 
 \ /
  Last update: 2019-07-26 02:10    [W:0.065 / U:2.744 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site