[lkml]   [2019]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH 4.19 243/271] xfs: flush removing page cache in xfs_reflink_remap_prep
commit 2c307174ab77e34645e75e12827646e044d273c3 upstream.

On a sub-page block size filesystem, fsx is failing with a data
corruption after a series of operations involving copying a file
with the destination offset beyond EOF of the destination of the file:

8093(157 mod 256): TRUNCATE DOWN from 0x7a120 to 0x50000 ******WWWW
8094(158 mod 256): INSERT 0x25000 thru 0x25fff (0x1000 bytes)
8095(159 mod 256): COPY 0x18000 thru 0x1afff (0x3000 bytes) to 0x2f400
8096(160 mod 256): WRITE 0x5da00 thru 0x651ff (0x7800 bytes) HOLE
8097(161 mod 256): COPY 0x2000 thru 0x5fff (0x4000 bytes) to 0x6fc00

The second copy here is beyond EOF, and it is to sub-page (4k) but
block aligned (1k) offset. The clone runs the EOF zeroing, landing
in a pre-existing post-eof delalloc extent. This zeroes the post-eof
extents in the page cache just fine, dirtying the pages correctly.

The problem is that xfs_reflink_remap_prep() now truncates the page
cache over the range that it is copying it to, and rounds that down
to cover the entire start page. This removes the dirty page over the
delalloc extent from the page cache without having written it back.
Hence later, when the page cache is flushed, the page at offset
0x6f000 has not been written back and hence exposes stale data,
which fsx trips over less than 10 operations later.

Fix this by changing xfs_reflink_remap_prep() to use

Signed-off-by: Dave Chinner <>
Reviewed-by: Christoph Hellwig <>
Reviewed-by: Darrick J. Wong <>
Signed-off-by: Darrick J. Wong <>
Signed-off-by: Luis Chamberlain <>
Signed-off-by: Sasha Levin <>
fs/xfs/xfs_bmap_util.c | 2 +-
fs/xfs/xfs_bmap_util.h | 2 ++
fs/xfs/xfs_reflink.c | 17 +++++++++++++----
3 files changed, 16 insertions(+), 5 deletions(-)

diff --git a/fs/xfs/xfs_bmap_util.c b/fs/xfs/xfs_bmap_util.c
index 211b06e4702e..41ad9eaab6ce 100644
--- a/fs/xfs/xfs_bmap_util.c
+++ b/fs/xfs/xfs_bmap_util.c
@@ -1080,7 +1080,7 @@ xfs_adjust_extent_unmap_boundaries(
return 0;

-static int
struct xfs_inode *ip,
xfs_off_t offset,
diff --git a/fs/xfs/xfs_bmap_util.h b/fs/xfs/xfs_bmap_util.h
index 87363d136bb6..9c73d012f56a 100644
--- a/fs/xfs/xfs_bmap_util.h
+++ b/fs/xfs/xfs_bmap_util.h
@@ -76,6 +76,8 @@ int xfs_swap_extents(struct xfs_inode *ip, struct xfs_inode *tip,
xfs_daddr_t xfs_fsb_to_db(struct xfs_inode *ip, xfs_fsblock_t fsb);

xfs_extnum_t xfs_bmap_count_leaves(struct xfs_ifork *ifp, xfs_filblks_t *count);
+int xfs_flush_unmap_range(struct xfs_inode *ip, xfs_off_t offset,
+ xfs_off_t len);
int xfs_bmap_count_blocks(struct xfs_trans *tp, struct xfs_inode *ip,
int whichfork, xfs_extnum_t *nextents,
xfs_filblks_t *count);
diff --git a/fs/xfs/xfs_reflink.c b/fs/xfs/xfs_reflink.c
index 38ea08a3dd1d..f3c393f309e1 100644
--- a/fs/xfs/xfs_reflink.c
+++ b/fs/xfs/xfs_reflink.c
@@ -1368,10 +1368,19 @@ xfs_reflink_remap_prep(
if (ret)
goto out_unlock;

- /* Zap any page cache for the destination file's range. */
- truncate_inode_pages_range(&inode_out->i_data,
- round_down(pos_out, PAGE_SIZE),
- round_up(pos_out + *len, PAGE_SIZE) - 1);
+ /*
+ * If pos_out > EOF, we may have dirtied blocks between EOF and
+ * pos_out. In that case, we need to extend the flush and unmap to cover
+ * from EOF to the end of the copy length.
+ */
+ if (pos_out > XFS_ISIZE(dest)) {
+ loff_t flen = *len + (pos_out - XFS_ISIZE(dest));
+ ret = xfs_flush_unmap_range(dest, XFS_ISIZE(dest), flen);
+ } else {
+ ret = xfs_flush_unmap_range(dest, pos_out, *len);
+ }
+ if (ret)
+ goto out_unlock;

/* If we're altering the file contents... */
if (!is_dedupe) {

 \ /
  Last update: 2019-07-25 07:47    [W:0.732 / U:8.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site