lkml.org 
[lkml]   [2019]   [Jul]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] opp: Manage empty OPP tables with clk handle
Date
With OPP core now supporting DVFS for IO devices, we have instances of
IO devices (same IP block) with require an OPP on some platforms/SoCs
while just needing to scale the clock on some others.
In order to avoid conditional code in every driver, (to check for
availability of OPPs and then deciding to do either dev_pm_opp_set_rate()
or clk_set_rate()) add support to manage empty OPP tables with a clk handle.
This makes dev_pm_opp_set_rate() equivalent of a clk_set_rate() for devices
with just a clk and no OPPs specified.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
drivers/opp/core.c | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/drivers/opp/core.c b/drivers/opp/core.c
index ae033bb1e5b7..fa7d4d6d37b3 100644
--- a/drivers/opp/core.c
+++ b/drivers/opp/core.c
@@ -801,6 +801,11 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
goto put_opp_table;
}

+ if (!_get_opp_count(opp_table)) {
+ ret = _generic_set_opp_clk_only(dev, clk, freq);
+ goto put_opp_table;
+ }
+
temp_freq = old_freq;
old_opp = _find_freq_ceil(opp_table, &temp_freq);
if (IS_ERR(old_opp)) {
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
\
 
 \ /
  Last update: 2019-07-02 06:37    [W:0.039 / U:2.880 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site