lkml.org 
[lkml]   [2019]   [Jul]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 1/6] dt-bindings: opp: Introduce opp-peak-KBps and opp-avg-KBps bindings
On Wed, Jul 17, 2019 at 9:36 PM Viresh Kumar <viresh.kumar@linaro.org> wrote:
>
> On 17-07-19, 13:29, Saravana Kannan wrote:
> > On Wed, Jul 17, 2019 at 12:54 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
> > >
> > > On 02-07-19, 18:10, Saravana Kannan wrote:
> > > > Interconnects often quantify their performance points in terms of
> > > > bandwidth. So, add opp-peak-KBps (required) and opp-avg-KBps (optional) to
> > > > allow specifying Bandwidth OPP tables in DT.
> > > >
> > > > opp-peak-KBps is a required property that replace opp-hz for Bandwidth OPP
> > > > tables.
> > > >
> > > > opp-avg-KBps is an optional property that can be used in Bandwidth OPP
> > > > tables.
> > > >
> > > > Signed-off-by: Saravana Kannan <saravanak@google.com>
> > > > ---
> > > > Documentation/devicetree/bindings/opp/opp.txt | 15 ++++++++++++---
> > > > 1 file changed, 12 insertions(+), 3 deletions(-)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
> > > > index 76b6c79604a5..c869e87caa2a 100644
> > > > --- a/Documentation/devicetree/bindings/opp/opp.txt
> > > > +++ b/Documentation/devicetree/bindings/opp/opp.txt
> > > > @@ -83,9 +83,14 @@ properties.
> > > >
> > > > Required properties:
> > > > - opp-hz: Frequency in Hz, expressed as a 64-bit big-endian integer. This is a
> > > > - required property for all device nodes but devices like power domains. The
> > > > - power domain nodes must have another (implementation dependent) property which
> > > > - uniquely identifies the OPP nodes.
> > > > + required property for all device nodes but for devices like power domains or
> > > > + bandwidth opp tables. The power domain nodes must have another (implementation
> > > > + dependent) property which uniquely identifies the OPP nodes. The interconnect
> > > > + opps are required to have the opp-peak-bw property.
> > >
> > > ??
> >
> > Sorry, what's the question? Was this an accidental email?
>
> Too much smartness is too bad sometimes, sorry about that :)
>
> I placed the ?? right below "opp-peak-bw", there is no property like
> that. You failed to update it :)

Ah, "typo". I'll fix it.

-Saravana

\
 
 \ /
  Last update: 2019-07-18 19:27    [W:0.066 / U:11.832 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site