lkml.org 
[lkml]   [2019]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/6] dt-bindings: opp: Introduce opp-peak-KBps and opp-avg-KBps bindings
On 02-07-19, 18:10, Saravana Kannan wrote:
> Interconnects often quantify their performance points in terms of
> bandwidth. So, add opp-peak-KBps (required) and opp-avg-KBps (optional) to
> allow specifying Bandwidth OPP tables in DT.
>
> opp-peak-KBps is a required property that replace opp-hz for Bandwidth OPP
> tables.
>
> opp-avg-KBps is an optional property that can be used in Bandwidth OPP
> tables.
>
> Signed-off-by: Saravana Kannan <saravanak@google.com>
> ---
> Documentation/devicetree/bindings/opp/opp.txt | 15 ++++++++++++---
> 1 file changed, 12 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
> index 76b6c79604a5..c869e87caa2a 100644
> --- a/Documentation/devicetree/bindings/opp/opp.txt
> +++ b/Documentation/devicetree/bindings/opp/opp.txt
> @@ -83,9 +83,14 @@ properties.
>
> Required properties:
> - opp-hz: Frequency in Hz, expressed as a 64-bit big-endian integer. This is a
> - required property for all device nodes but devices like power domains. The
> - power domain nodes must have another (implementation dependent) property which
> - uniquely identifies the OPP nodes.
> + required property for all device nodes but for devices like power domains or
> + bandwidth opp tables. The power domain nodes must have another (implementation
> + dependent) property which uniquely identifies the OPP nodes. The interconnect
> + opps are required to have the opp-peak-bw property.

??

> +
> +- opp-peak-KBps: Peak bandwidth in kilobytes per second, expressed as a 32-bit
> + big-endian integer. This is a required property for all devices that don't
> + have opp-hz. For example, bandwidth OPP tables for interconnect paths.
>
> Optional properties:
> - opp-microvolt: voltage in micro Volts.
> @@ -132,6 +137,10 @@ Optional properties:
> - opp-level: A value representing the performance level of the device,
> expressed as a 32-bit integer.
>
> +- opp-avg-KBps: Average bandwidth in kilobytes per second, expressed as a
> + 32-bit big-endian integer. This property is only meaningful in OPP tables
> + where opp-peak-KBps is present.
> +
> - clock-latency-ns: Specifies the maximum possible transition latency (in
> nanoseconds) for switching to this OPP from any other OPP.
>
> --
> 2.22.0.410.gd8fdbe21b5-goog

--
viresh

\
 
 \ /
  Last update: 2019-07-17 09:55    [W:0.192 / U:1.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site