[lkml]   [2019]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 1/3] platform/x86/pcengines-apuv2: add mpcie reset gpio export

>> On APUx we have also mpcie2/mpcie3 reset pins. To make it possible to
>> reset
>> the ports from the userspace, add the definition to this platform
>> device. The gpio can then be exported by the legancy gpio subsystem to
>> toggle the mpcie reset pin.
> Just tested your patch on an apu3. The driver itself seems to work,
> but the pins don't seem to actually do anything.
> How exactly did you test it ? Do you have some test case ?

I plugged in a mpcie usb modem.
In my test case it was a EC25 from Quectel in mpcie2 port.
After that I did a reboot and exported the gpio via "/sys/class/gpio"
Then I executed the command "echo 0 > /sys/class/gpio/<name>/value" and
"echo 1 > /sys/class/gpio/<name>/value".
Then I have seen the log message in the kernel that the device did an
-- Florian

 \ /
  Last update: 2019-07-15 17:45    [W:0.129 / U:4.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site