lkml.org 
[lkml]   [2019]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 20/50] ARM: dts: exynos: change and rename FSYS OPP table in Exynos5420
Date
The FSYS and FSYS2 buses have similar characteristics and both have max
frequency 240MHz. The old OPP table bus_fsys_apb_opp_table should be used
only to FSYS APB bus because APB max frequency is 200MHz.
The new OPPs for FSYS should increase its performance and related devices.

Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
---
arch/arm/boot/dts/exynos5420.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 941c58bdd809..c7fc4b829b2a 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -995,7 +995,7 @@
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_ACLK200_FSYS>;
clock-names = "bus";
- operating-points-v2 = <&bus_fsys_apb_opp_table>;
+ operating-points-v2 = <&bus_fsys_opp_table>;
status = "disabled";
};

@@ -1003,7 +1003,7 @@
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_ACLK200_FSYS2>;
clock-names = "bus";
- operating-points-v2 = <&bus_fsys2_opp_table>;
+ operating-points-v2 = <&bus_fsys_opp_table>;
status = "disabled";
};

@@ -1157,7 +1157,7 @@
};
};

- bus_fsys2_opp_table: opp_table5 {
+ bus_fsys_opp_table: opp_table5 {
compatible = "operating-points-v2";

opp00 {
--
2.17.1
\
 
 \ /
  Last update: 2019-07-15 14:47    [W:0.400 / U:1.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site