lkml.org 
[lkml]   [2019]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] mmc: host: sdhci: Fix the incorrect soft reset operation when runtime resuming
Date
In sdhci_runtime_resume_host() function, we will always do software reset
for all, but according to the specification, we should issue reset command
and reinitialize the SD/eMMC card. However, we only do reinitialize the
SD/eMMC card when the SD/eMMC card are power down during runtime suspend.

Thus for those platforms that do not power down the SD/eMMC card during
runtime suspend, we should not do software reset for all. To fix this
issue, we can add one condition to validate the MMC_CAP_AGGRESSIVE_PM
to decide if we can do software reset for all or just reset command
and data lines.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
drivers/mmc/host/sdhci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 9715834..470c5e0 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -3333,7 +3333,7 @@ int sdhci_runtime_resume_host(struct sdhci_host *host)
host->ops->enable_dma(host);
}

- sdhci_init(host, 0);
+ sdhci_init(host, !(mmc->caps & MMC_CAP_AGGRESSIVE_PM));

if (mmc->ios.power_mode != MMC_POWER_UNDEFINED &&
mmc->ios.power_mode != MMC_POWER_OFF) {
--
1.7.9.5
\
 
 \ /
  Last update: 2019-07-15 12:59    [W:0.079 / U:2.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site