lkml.org 
[lkml]   [2019]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] leds: Add control of the voltage/current regulator to the LED core
From
Date

On 15/07/2019 11:24, Daniel Thompson wrote:
> On Mon, Jul 15, 2019 at 11:01:29AM +0200, Jean-Jacques Hiblot wrote:
>> Hi Dan,
>>
>> On 12/07/2019 20:49, Dan Murphy wrote:
>>> JJ
>>>
>>> On 7/8/19 5:35 AM, Jean-Jacques Hiblot wrote:
>>>> A LED is usually powered by a voltage/current regulator. Let the LED
>>>> core
>>> Let the LED core know
>>>> about it. This allows the LED core to turn on or off the power supply
>>>> as needed.
>>>> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
>>>> ---
>>>>   drivers/leds/led-class.c | 10 ++++++++
>>>>   drivers/leds/led-core.c  | 53 +++++++++++++++++++++++++++++++++++++---
>>>>   include/linux/leds.h     |  4 +++
>>>>   3 files changed, 64 insertions(+), 3 deletions(-)
>>>>
>>>> diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
>>>> index 4793e77808e2..e01b2d982564 100644
>>>> --- a/drivers/leds/led-class.c
>>>> +++ b/drivers/leds/led-class.c
>>>> @@ -17,6 +17,7 @@
>>>>   #include <linux/slab.h>
>>>>   #include <linux/spinlock.h>
>>>>   #include <linux/timer.h>
>>>> +#include <linux/regulator/consumer.h>
>>> What if you move this to leds.h so core and class can both include it.
>>>
>>>
>>>>   #include <uapi/linux/uleds.h>
>>>>   #include "leds.h"
>>>>   @@ -272,6 +273,15 @@ int of_led_classdev_register(struct device
>>>> *parent, struct device_node *np,
>>>>           dev_warn(parent, "Led %s renamed to %s due to name collision",
>>>>                   led_cdev->name, dev_name(led_cdev->dev));
>>>>   +    led_cdev->regulator = devm_regulator_get(led_cdev->dev, "power");
>>> Is the regulator always going to be called power?
>> Actually in the dts, that will be "power-supply". I lacked the imagination
>> to come up with a better name.
>>
>>
>>
>>>> +    if (IS_ERR(led_cdev->regulator)) {
>>>> +        dev_err(led_cdev->dev, "Cannot get the power supply for %s\n",
>>>> +            led_cdev->name);
>>>> +        device_unregister(led_cdev->dev);
>>>> +        mutex_unlock(&led_cdev->led_access);
>>>> +        return PTR_ERR(led_cdev->regulator);
>>> This is listed as optional in the DT doc.  This appears to be required.
>> The regulator core will provide a dummy regulator if none is given in the
>> device tree. I would rather have an error in that case, but that is not how
>> it works.
> If you actively wanted to get -ENODEV back when there is no regulator
> then you can use devm_regulator_get_optional() for that.
>
> However perhaps be careful what you wish for. If you use get_optional()
> then you will have to sprinkle NULL or IS_ERR() checks everywhere. I'd
> favour using the current approach!

Thanks for the info. I think I'll use the get_optionnal(). That will add
a bit of complexity, but it will avoid deferring some work in
led_set_brightness_nopm() when it is not needed.

JJ

>
>
> Daniel.
>
>>
>>> I prefer to keep it optional.  Many LED drivers are connected to fixed
>>> non-managed supplies.
>>>
>>>> +    }
>>>> +
>>>>       if (led_cdev->flags & LED_BRIGHT_HW_CHANGED) {
>>>>           ret = led_add_brightness_hw_changed(led_cdev);
>>>>           if (ret) {
>>>> diff --git a/drivers/leds/led-core.c b/drivers/leds/led-core.c
>>>> index 7107cd7e87cf..139de6b08cad 100644
>>>> --- a/drivers/leds/led-core.c
>>>> +++ b/drivers/leds/led-core.c
>>>> @@ -16,6 +16,7 @@
>>>>   #include <linux/rwsem.h>
>>>>   #include <linux/slab.h>
>>>>   #include "leds.h"
>>>> +#include <linux/regulator/consumer.h>
>>>>     DECLARE_RWSEM(leds_list_lock);
>>>>   EXPORT_SYMBOL_GPL(leds_list_lock);
>>>> @@ -23,6 +24,31 @@ EXPORT_SYMBOL_GPL(leds_list_lock);
>>>>   LIST_HEAD(leds_list);
>>>>   EXPORT_SYMBOL_GPL(leds_list);
>>>>   +static bool __led_need_regulator_update(struct led_classdev
>>>> *led_cdev,
>>>> +                    int brightness)
>>>> +{
>>>> +    bool new_regulator_state = (brightness != LED_OFF);
>>>> +
>>>> +    return led_cdev->regulator_state != new_regulator_state;
>>>> +}
>>>> +
>>>> +static int __led_handle_regulator(struct led_classdev *led_cdev,
>>>> +                int brightness)
>>>> +{
>>>> +    if (__led_need_regulator_update(led_cdev, brightness)) {
>>>> +        int ret;
>>> Prefer to this to be moved up.
>> ok
>>>> +
>>>> +        if (brightness != LED_OFF)
>>>> +            ret = regulator_enable(led_cdev->regulator);
>>>> +        else
>>>> +            ret = regulator_disable(led_cdev->regulator);
>>>> +        if (ret)
>>>> +            return ret;
>>> new line
>>>> +        led_cdev->regulator_state = (brightness != LED_OFF);
>>>> +    }
>>>> +    return 0;
>>>> +}
>>>> +
>>>>   static int __led_set_brightness(struct led_classdev *led_cdev,
>>>>                   enum led_brightness value)
>>>>   {
>>>> @@ -80,6 +106,7 @@ static void led_timer_function(struct timer_list *t)
>>>>       }
>>>>         led_set_brightness_nosleep(led_cdev, brightness);
>>>> +    __led_handle_regulator(led_cdev, brightness);
>>> Again this seems to indicate that the regulator is a required property
>>> for the LEDs
>>>
>>> This needs to be made optional.  And the same comment through out for
>>> every call.
>>>
>>>
>>>>         /* Return in next iteration if led is in one-shot mode and
>>>> we are in
>>>>        * the final blink state so that the led is toggled each
>>>> delay_on +
>>>> @@ -115,6 +142,8 @@ static void set_brightness_delayed(struct
>>>> work_struct *ws)
>>>>       if (ret == -ENOTSUPP)
>>>>           ret = __led_set_brightness_blocking(led_cdev,
>>>>                       led_cdev->delayed_set_value);
>>>> +    __led_handle_regulator(led_cdev, led_cdev->delayed_set_value);
>>>> +
>>>>       if (ret < 0 &&
>>>>           /* LED HW might have been unplugged, therefore don't warn */
>>>>           !(ret == -ENODEV && (led_cdev->flags & LED_UNREGISTERING) &&
>>>> @@ -141,6 +170,7 @@ static void led_set_software_blink(struct
>>>> led_classdev *led_cdev,
>>>>       /* never on - just set to off */
>>>>       if (!delay_on) {
>>>>           led_set_brightness_nosleep(led_cdev, LED_OFF);
>>>> +        __led_handle_regulator(led_cdev, LED_OFF);
>>>>           return;
>>>>       }
>>>>   @@ -148,6 +178,7 @@ static void led_set_software_blink(struct
>>>> led_classdev *led_cdev,
>>>>       if (!delay_off) {
>>>>           led_set_brightness_nosleep(led_cdev,
>>>>                          led_cdev->blink_brightness);
>>>> +        __led_handle_regulator(led_cdev, led_cdev->blink_brightness);
>>>>           return;
>>>>       }
>>>>   @@ -256,8 +287,14 @@ void led_set_brightness_nopm(struct
>>>> led_classdev *led_cdev,
>>>>                     enum led_brightness value)
>>>>   {
>>>>       /* Use brightness_set op if available, it is guaranteed not to
>>>> sleep */
>>>> -    if (!__led_set_brightness(led_cdev, value))
>>>> -        return;
>>>> +    if (!__led_set_brightness(led_cdev, value)) {
>>>> +        /*
>>>> +         * if regulator state doesn't need to be changed, that is all/
>>>> +         * Otherwise delegate the change to a work queue
>>>> +         */
>>>> +        if (!__led_need_regulator_update(led_cdev, value))
>>>> +            return;
>>>> +    }
>>>>         /* If brightness setting can sleep, delegate it to a work
>>>> queue task */
>>>>       led_cdev->delayed_set_value = value;
>>>> @@ -280,6 +317,8 @@ EXPORT_SYMBOL_GPL(led_set_brightness_nosleep);
>>>>   int led_set_brightness_sync(struct led_classdev *led_cdev,
>>>>                   enum led_brightness value)
>>>>   {
>>>> +    int ret;
>>>> +
>>>>       if (led_cdev->blink_delay_on || led_cdev->blink_delay_off)
>>>>           return -EBUSY;
>>>>   @@ -288,7 +327,15 @@ int led_set_brightness_sync(struct
>>>> led_classdev *led_cdev,
>>>>       if (led_cdev->flags & LED_SUSPENDED)
>>>>           return 0;
>>>>   -    return __led_set_brightness_blocking(led_cdev,
>>>> led_cdev->brightness);
>>>> +    ret = __led_set_brightness_blocking(led_cdev,
>>>> led_cdev->brightness);
>>>> +    if (ret)
>>>> +        return ret;
>>>> +
>>>> +    ret = __led_handle_regulator(led_cdev, led_cdev->brightness);
>>> Can't you just return here?
>> ok
>>
>>
>> thanks for the review
>>
>> JJ
>>
>>> Dan
>>>
>>>> +    if (ret)
>>>> +        return ret;
>>>> +
>>>> +    return 0;
>>>>   }
>>>>   EXPORT_SYMBOL_GPL(led_set_brightness_sync);
>>>>   diff --git a/include/linux/leds.h b/include/linux/leds.h
>>>> index 9b2bf574a17a..bee8e3f8dddd 100644
>>>> --- a/include/linux/leds.h
>>>> +++ b/include/linux/leds.h
>>>> @@ -123,6 +123,10 @@ struct led_classdev {
>>>>         /* Ensures consistent access to the LED Flash Class device */
>>>>       struct mutex        led_access;
>>>> +
>>>> +    /* regulator */
>>>> +    struct regulator    *regulator;
>>>> +    bool            regulator_state;
>>>>   };
>>>>     extern int of_led_classdev_register(struct device *parent,

\
 
 \ /
  Last update: 2019-07-15 11:47    [W:0.046 / U:2.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site