lkml.org 
[lkml]   [2019]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [v4 4/6] dt-bindings: phy: Document the Synopsys MIPI DPHY Rx bindings
On Tue, Jul 9, 2019 at 10:29 AM Luis de Oliveira
<Luis.Oliveira@synopsys.com> wrote:
>
> From: Rob Herring <robh@kernel.org>
> Date: Tue, Jul 09, 2019 at 15:20:00
>
> > On Tue, Jun 11, 2019 at 09:20:53PM +0200, Luis Oliveira wrote:
> > > Add device-tree bindings documentation for SNPS DesignWare MIPI D-PHY in
> > > RX mode.
> > >
> > > Signed-off-by: Luis Oliveira <luis.oliveira@synopsys.com>
> > > ---
> > > Changelog
> > > v3-v4
> > > - @Laurent I know I told you I could remove the snps,dphy-frequency on V3 but
> > > it is really useful for me here. I removed all other the proprietary
> > > properties except this one. Do you still think it must be removed?
> > > - Frequency units @Rob
> >
> > Frequency units means append '-khz' to the property name. That also
> > makes the 'frequency' part redundant, so maybe name it more around what
> > the frequency is. The frequency for what?
> >
> > Rob
> >
>
> This is the D-PHY high speed frequency configuration that corresponds to
> the high speed data transfer of the bus.
> Basically is the transmission speed per lane.
> Do you think I can use "link-frequencies" (present in
> video-interfaces.txt) with one frequency?

Seems reasonable.

Rob

\
 
 \ /
  Last update: 2019-07-10 15:51    [W:0.046 / U:3.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site