lkml.org 
[lkml]   [2019]   [Jun]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 0/9] Add SD host controller support for SC9860 platform
On Tue, 4 Jun 2019 at 10:14, Baolin Wang <baolin.wang@linaro.org> wrote:
>
> This patch set adds optional clock support, HS400 enhanced strobe mode support,
> PHY DLL configuration and other optimization to make the SD host controller
> can work well on the Spreadtrum SC9860 platform.
>
> Changes from v1:
> - Add acked-tags from Adrian.
> - Fix one mistake by changing MMC_TIMING_MMC_HS to MMC_TIMING_SD_HS in patch 8.
>
> Baolin Wang (9):
> mmc: sdhci-sprd: Check the enable clock's return value correctly
> dt-bindings: mmc: sprd: Add another optional clock documentation
> mmc: sdhci-sprd: Add optional gate clock support
> mmc: sdhci-sprd: Implement the get_max_timeout_count() interface
> mmc: sdhci-sprd: Add HS400 enhanced strobe mode
> mmc: sdhci-sprd: Enable PHY DLL to make clock stable
> dt-bindings: mmc: sprd: Add PHY DLL delay documentation
> mmc: sdhci-sprd: Add PHY DLL delay configuration
> arm64: dts: sprd: Add Spreadtrum SD host controller support
>
> .../devicetree/bindings/mmc/sdhci-sprd.txt | 19 +++
> arch/arm64/boot/dts/sprd/whale2.dtsi | 35 ++++
> drivers/mmc/host/sdhci-sprd.c | 171 +++++++++++++++++++-
> 3 files changed, 217 insertions(+), 8 deletions(-)
>
> --
> 1.7.9.5
>

Patch 1 -> patch 8, applied for next, thanks!

Patch 9 is for arm-soc.

Kind regards
Uffe

\
 
 \ /
  Last update: 2019-06-07 13:03    [W:0.066 / U:10.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site