lkml.org 
[lkml]   [2019]   [Jun]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 17/20] dt: bindings: fix some broken links from txt->yaml conversion
Date
Some new files got converted to yaml, but references weren't
updated accordingly.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
Documentation/devicetree/bindings/media/st,stm32-dcmi.txt | 2 +-
Documentation/devicetree/bindings/sound/st,stm32-i2s.txt | 2 +-
Documentation/devicetree/bindings/sound/st,stm32-sai.txt | 2 +-
MAINTAINERS | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmi.txt b/Documentation/devicetree/bindings/media/st,stm32-dcmi.txt
index 249790a93017..3122ded82eb4 100644
--- a/Documentation/devicetree/bindings/media/st,stm32-dcmi.txt
+++ b/Documentation/devicetree/bindings/media/st,stm32-dcmi.txt
@@ -11,7 +11,7 @@ Required properties:
- clock-names: must contain "mclk", which is the DCMI peripherial clock
- pinctrl: the pincontrol settings to configure muxing properly
for pins that connect to DCMI device.
- See Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt.
+ See Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml.
- dmas: phandle to DMA controller node,
see Documentation/devicetree/bindings/dma/stm32-dma.txt
- dma-names: must contain "tx", which is the transmit channel from DCMI to DMA
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt b/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt
index 58c341300552..cbf24bcd1b8d 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt
@@ -18,7 +18,7 @@ Required properties:
See Documentation/devicetree/bindings/dma/stm32-dma.txt.
- dma-names: Identifier for each DMA request line. Must be "tx" and "rx".
- pinctrl-names: should contain only value "default"
- - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
+ - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml

Optional properties:
- resets: Reference to a reset controller asserting the reset controller
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
index 3f4467ff0aa2..944743dd9212 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
+++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
@@ -41,7 +41,7 @@ SAI subnodes required properties:
"tx": if sai sub-block is configured as playback DAI
"rx": if sai sub-block is configured as capture DAI
- pinctrl-names: should contain only value "default"
- - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
+ - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml

SAI subnodes Optional properties:
- st,sync: specify synchronization mode.
diff --git a/MAINTAINERS b/MAINTAINERS
index 26e0369c1641..07a1f8af9e39 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1288,7 +1288,7 @@ ARM PRIMECELL SSP PL022 SPI DRIVER
M: Linus Walleij <linus.walleij@linaro.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
-F: Documentation/devicetree/bindings/spi/spi_pl022.txt
+F: Documentation/devicetree/bindings/spi/spi-pl022.yaml
F: drivers/spi/spi-pl022.c

ARM PRIMECELL UART PL010 AND PL011 DRIVERS
--
2.21.0
\
 
 \ /
  Last update: 2019-06-07 20:56    [W:0.075 / U:5.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site