lkml.org 
[lkml]   [2019]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/2] input: soc_button_array for newer surface devices
On Thu, Jun 20, 2019 at 2:51 PM Maximilian Luz <luzmaximilian@gmail.com> wrote:
>
> Power and volume button support for 5th and 6th genration Microsoft
> Surface devices via soc_button_array.
>
> Note that these devices use the same MSHW0040 device as on the Surface
> Pro 4, however the implementation is different (GPIOs vs. ACPI
> notifications). Thus some checking is required to ensure we only load
> this driver on the correct devices.
>

Either I need an Ack from Dmitry, or it should go via his tree.

> Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
> ---
> drivers/input/misc/soc_button_array.c | 134 +++++++++++++++++++++++---
> 1 file changed, 122 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/input/misc/soc_button_array.c b/drivers/input/misc/soc_button_array.c
> index 5e59f8e57f8e..157f53a2bd51 100644
> --- a/drivers/input/misc/soc_button_array.c
> +++ b/drivers/input/misc/soc_button_array.c
> @@ -25,6 +25,17 @@ struct soc_button_info {
> bool wakeup;
> };
>
> +/**
> + * struct soc_device_data - driver data for different device types
> + * @button_info: specifications of buttons, if NULL specification is assumed to
> + * be present in _DSD
> + * @check: device-specific check (NULL means all will be accepted)
> + */
> +struct soc_device_data {
> + struct soc_button_info *button_info;
> + int (*check)(struct device *dev);
> +};
> +
> /*
> * Some of the buttons like volume up/down are auto repeat, while others
> * are not. To support both, we register two platform devices, and put
> @@ -310,6 +321,7 @@ static int soc_button_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> const struct acpi_device_id *id;
> + struct soc_device_data *device_data;
> struct soc_button_info *button_info;
> struct soc_button_data *priv;
> struct platform_device *pd;
> @@ -320,18 +332,20 @@ static int soc_button_probe(struct platform_device *pdev)
> if (!id)
> return -ENODEV;
>
> - if (!id->driver_data) {
> + device_data = (struct soc_device_data *)id->driver_data;
> + if (device_data && device_data->check) {
> + error = device_data->check(dev);
> + if (error)
> + return error;
> + }
> +
> + if (device_data && device_data->button_info) {
> + button_info = (struct soc_button_info *)
> + device_data->button_info;
> + } else {
> button_info = soc_button_get_button_info(dev);
> if (IS_ERR(button_info))
> return PTR_ERR(button_info);
> - } else {
> - button_info = (struct soc_button_info *)id->driver_data;
> - }
> -
> - error = gpiod_count(dev, NULL);
> - if (error < 0) {
> - dev_dbg(dev, "no GPIO attached, ignoring...\n");
> - return -ENODEV;
> }
>
> priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> @@ -357,12 +371,32 @@ static int soc_button_probe(struct platform_device *pdev)
> if (!priv->children[0] && !priv->children[1])
> return -ENODEV;
>
> - if (!id->driver_data)
> + if (!device_data || !device_data->button_info)
> devm_kfree(dev, button_info);
>
> return 0;
> }
>
> +
> +static int soc_device_check_generic(struct device *dev)
> +{
> + int gpios;
> +
> + gpios = gpiod_count(dev, NULL);
> + if (gpios < 0) {
> + dev_dbg(dev, "no GPIO attached, ignoring...\n");
> + return -ENODEV;
> + }
> +
> + return 0;
> +}
> +
> +static struct soc_device_data soc_device_ACPI0011 = {
> + .button_info = NULL,
> + .check = soc_device_check_generic,
> +};
> +
> +
> /*
> * Definition of buttons on the tablet. The ACPI index of each button
> * is defined in section 2.8.7.2 of "Windows ACPI Design Guide for SoC
> @@ -377,9 +411,85 @@ static struct soc_button_info soc_button_PNP0C40[] = {
> { }
> };
>
> +static struct soc_device_data soc_device_PNP0C40 = {
> + .button_info = soc_button_PNP0C40,
> + .check = soc_device_check_generic,
> +};
> +
> +
> +/*
> + * Special device check for Surface Book 2 and Surface Pro (2017).
> + * Both, the Surface Pro 4 (surfacepro3_button.c) and the above mentioned
> + * devices use MSHW0040 for power and volume buttons, however the way they
> + * have to be addressed differs. Make sure that we only load this drivers
> + * for the correct devices by checking the OEM Platform Revision provided by
> + * the _DSM method.
> + */
> +#define MSHW0040_DSM_REVISION 0x01
> +#define MSHW0040_DSM_GET_OMPR 0x02 // get OEM Platform Revision
> +static const guid_t MSHW0040_DSM_UUID =
> + GUID_INIT(0x6fd05c69, 0xcde3, 0x49f4, 0x95, 0xed, 0xab, 0x16, 0x65,
> + 0x49, 0x80, 0x35);
> +
> +static int soc_device_check_MSHW0040(struct device *dev)
> +{
> + acpi_handle handle = ACPI_HANDLE(dev);
> + union acpi_object *result;
> + u64 oem_platform_rev = 0;
> + int gpios;
> +
> + // get OEM platform revision
> + result = acpi_evaluate_dsm_typed(handle, &MSHW0040_DSM_UUID,
> + MSHW0040_DSM_REVISION,
> + MSHW0040_DSM_GET_OMPR, NULL,
> + ACPI_TYPE_INTEGER);
> +
> + if (result) {
> + oem_platform_rev = result->integer.value;
> + ACPI_FREE(result);
> + }
> +
> + if (oem_platform_rev == 0)
> + return -ENODEV;
> +
> + dev_dbg(dev, "OEM Platform Revision %llu\n", oem_platform_rev);
> +
> + /*
> + * We are _really_ expecting GPIOs here. If we do not get any, this
> + * means the GPIO driver has not been loaded yet (which can happen).
> + * Try again later.
> + */
> + gpios = gpiod_count(dev, NULL);
> + if (gpios < 0)
> + return -EAGAIN;
> +
> + return 0;
> +}
> +
> +/*
> + * Button infos for Microsoft Surface Book 2 and Surface Pro (2017).
> + * Obtained from DSDT/testing.
> + */
> +static struct soc_button_info soc_button_MSHW0040[] = {
> + { "power", 0, EV_KEY, KEY_POWER, false, true },
> + { "volume_up", 2, EV_KEY, KEY_VOLUMEUP, true, false },
> + { "volume_down", 4, EV_KEY, KEY_VOLUMEDOWN, true, false },
> + { }
> +};
> +
> +static struct soc_device_data soc_device_MSHW0040 = {
> + .button_info = soc_button_MSHW0040,
> + .check = soc_device_check_MSHW0040,
> +};
> +
> +
> static const struct acpi_device_id soc_button_acpi_match[] = {
> - { "PNP0C40", (unsigned long)soc_button_PNP0C40 },
> - { "ACPI0011", 0 },
> + { "PNP0C40", (unsigned long)&soc_device_PNP0C40 },
> + { "ACPI0011", (unsigned long)&soc_device_ACPI0011 },
> +
> + /* Microsoft Surface Devices (5th and 6th generation) */
> + { "MSHW0040", (unsigned long)&soc_device_MSHW0040 },
> +
> { }
> };
>
> --
> 2.22.0
>


--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2019-06-29 16:23    [W:0.133 / U:1.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site