lkml.org 
[lkml]   [2019]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V5 08/18] clk: tegra: Add suspend resume support for DFLL
From
Date
28.06.2019 5:12, Sowjanya Komatineni пишет:
> This patch creates APIs for supporting Tegra210 clock driver to
> perform DFLL suspend and resume operation.
>
> During suspend, DFLL mode is saved and on resume Tegra210 clock driver
> invokes DFLL resume API to re-initialize DFLL to enable target device
> clock in open loop mode or closed loop mode.
>
> Acked-by: Thierry Reding <treding@nvidia.com>
> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
> ---
> drivers/clk/tegra/clk-dfll.c | 78 ++++++++++++++++++++++++++++++++++++++++++++
> drivers/clk/tegra/clk-dfll.h | 2 ++
> 2 files changed, 80 insertions(+)
>
> diff --git a/drivers/clk/tegra/clk-dfll.c b/drivers/clk/tegra/clk-dfll.c
> index f8688c2ddf1a..a1f37cf99b00 100644
> --- a/drivers/clk/tegra/clk-dfll.c
> +++ b/drivers/clk/tegra/clk-dfll.c
> @@ -277,6 +277,7 @@ struct tegra_dfll {
> unsigned long dvco_rate_min;
>
> enum dfll_ctrl_mode mode;
> + enum dfll_ctrl_mode resume_mode;
> enum dfll_tune_range tune_range;
> struct dentry *debugfs_dir;
> struct clk_hw dfll_clk_hw;
> @@ -1864,6 +1865,83 @@ static int dfll_fetch_common_params(struct tegra_dfll *td)
> }
>
> /*
> + * tegra_dfll_suspend
> + * @pdev: DFLL instance
> + *
> + * dfll controls clock/voltage to other devices, including CPU. Therefore,
> + * dfll driver pm suspend callback does not stop cl-dvfs operations.
> + */
> +void tegra_dfll_suspend(struct platform_device *pdev)
> +{
> + struct tegra_dfll *td = dev_get_drvdata(&pdev->dev);
> +
> + if (!td)
> + return;
> +
> + if (td->mode <= DFLL_DISABLED)
> + return;
> +
> + td->resume_mode = td->mode;
> + switch (td->mode) {
> + case DFLL_CLOSED_LOOP:
> + dfll_set_mode(td, DFLL_CLOSED_LOOP);
> + dfll_set_frequency_request(td, &td->last_req);
> +
> + dfll_unlock(td);
> + break;
> + default:
> + break;
> + }
> +}
> +
> +/**
> + * tegra_dfll_resume - reprogram the DFLL after context-loss
> + * @pdev: DFLL instance
> + *
> + * Re-initialize and enable target device clock in open loop mode. Called
> + * directly from SoC clock resume syscore operation. Closed loop will be
> + * re-entered in platform syscore ops as well after CPU clock source is
> + * switched to DFLL in open loop.
> + */
> +void tegra_dfll_resume(struct platform_device *pdev, bool on_dfll)
> +{
> + struct tegra_dfll *td = dev_get_drvdata(&pdev->dev);
> +
> + if (!td)
> + return;
> +
> + if (on_dfll) {
> + if (td->resume_mode == DFLL_CLOSED_LOOP)
> + dfll_lock(td);
> + td->resume_mode = DFLL_DISABLED;
> + return;
> + }
> +
> + reset_control_deassert(td->dvco_rst);
> +
> + pm_runtime_get(td->dev);

pm_runtime_get_sync()?

Otherwise looks like you're risking a lot here because pm_runtime_get() is an
asynchronous request.

> + /* Re-init DFLL */
> + dfll_init_out_if(td);
> + dfll_set_default_params(td);
> + dfll_set_open_loop_config(td);
> +
> + pm_runtime_put(td->dev);
> +
> + /* Restore last request and mode up to open loop */
> + switch (td->resume_mode) {
> + case DFLL_CLOSED_LOOP:
> + case DFLL_OPEN_LOOP:
> + dfll_set_mode(td, DFLL_OPEN_LOOP);
> + if (td->pmu_if == TEGRA_DFLL_PMU_I2C)
> + dfll_i2c_set_output_enabled(td, false);
> + break;
> + default:
> + break;
> + }
> +}


\
 
 \ /
  Last update: 2019-06-29 15:29    [W:0.384 / U:3.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site