lkml.org 
[lkml]   [2019]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 08/11] PM / devfreq: tegra30: Stop de-boosting once it's finished
Date
Once boosting value is 0, then further consecutive-down events won't do
anything useful since the only purpose of those consecutive events to
boost the freq and de-boosting is over in the case of 0. Note that upper
watermark is infinitely high in a case of frequency max out and thus the
upper events are stopping by themselves. In a result of this change all
parasite interrupts are fixed now and interrupts activity is nearly
non-existent now!

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
drivers/devfreq/tegra30-devfreq.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/drivers/devfreq/tegra30-devfreq.c b/drivers/devfreq/tegra30-devfreq.c
index 6fb3ca125438..81449cc1392b 100644
--- a/drivers/devfreq/tegra30-devfreq.c
+++ b/drivers/devfreq/tegra30-devfreq.c
@@ -424,6 +424,8 @@ static void actmon_isr_device(struct tegra_devfreq *tegra,
dev->config->boost_up_coeff);
dev->boost_freq += ACTMON_BOOST_FREQ_STEP;

+ dev_ctrl |= ACTMON_DEV_CTRL_CONSECUTIVE_BELOW_WMARK_EN;
+
if (dev->boost_freq >= tegra->max_freq && !low_activity)
dev->boost_freq = tegra->max_freq;

@@ -442,6 +444,10 @@ static void actmon_isr_device(struct tegra_devfreq *tegra,
tegra_devfreq_update_wmark(tegra, dev);
}

+ /* no boosting => no need for consecutive-down interrupt */
+ if (dev->boost_freq == 0)
+ dev_ctrl &= ~ACTMON_DEV_CTRL_CONSECUTIVE_BELOW_WMARK_EN;
+
device_writel(dev, dev_ctrl, ACTMON_DEV_CTRL);

device_writel(dev, ACTMON_INTR_STATUS_CLEAR, ACTMON_DEV_INTR_STATUS);
--
2.22.0
\
 
 \ /
  Last update: 2019-06-24 05:11    [W:0.052 / U:1.864 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site