[lkml]   [2019]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v3 0/9] Support for Allwinner V3/S3L and Sochip S3
This patchset tries to add support for Allwinner V3/S3L and Sochip S3.

Allwinner V3/V3s/S3L and Sochip S3 share the same die, but with
different package. V3 is BGA w/o co-packaged DDR, V3s is QFP w/ DDR2,
S3L is BGA w/ DDR2 and S3 is BGA w/ DDR3. (S3 and S3L is compatible
for pinout, but because of different DDR, DDR voltage is different
between the two variants). Because of the pin count of V3s is
restricted due to the package, some pins are not bound on V3s, but
they're bound on V3/S3/S3L.

Currently the kernel is only prepared for the features available on V3s.
This patchset adds the features missing on V3s for using them on
V3/S3/S3L, and add bindings for V3/S3/S3L. It also adds a S3 SoM by
Sipeed, called Lichee Zero Plus.

Icenowy Zheng (9):
pinctrl: sunxi: v3s: introduce support for V3
clk: sunxi-ng: v3s: add the missing PLL_DDR1
dt-bindings: clk: sunxi-ccu: add compatible string for V3 CCU
clk: sunxi-ng: v3s: add Allwinner V3 support
dt-bindings: vendor-prefixes: add SoChip
ARM: sunxi: dts: s3/s3l/v3: add DTSI files for S3/S3L/V3 SoCs
dt-bindings: vendor-prefixes: add Sipeed
dt-bindings: arm: sunxi: add binding for Lichee Zero Plus core board
ARM: dts: sun8i: s3: add devicetree for Lichee zero plus w/ S3

.../devicetree/bindings/arm/sunxi.yaml | 5 +
.../clock/allwinner,sun4i-a10-ccu.yaml | 1 +
.../devicetree/bindings/vendor-prefixes.yaml | 4 +
arch/arm/boot/dts/Makefile | 1 +
.../boot/dts/sun8i-s3-lichee-zero-plus.dts | 8 +
.../dts/sun8i-s3-s3l-lichee-zero-plus.dtsi | 44 ++
arch/arm/boot/dts/sun8i-s3.dtsi | 6 +
arch/arm/boot/dts/sun8i-s3l.dtsi | 6 +
arch/arm/boot/dts/sun8i-v3.dtsi | 14 +
drivers/clk/sunxi-ng/ccu-sun8i-v3s.c | 244 ++++++++-
drivers/clk/sunxi-ng/ccu-sun8i-v3s.h | 6 +-
drivers/pinctrl/sunxi/pinctrl-sun8i-v3s.c | 473 ++++++++++++++----
drivers/pinctrl/sunxi/pinctrl-sunxi.h | 2 +
include/dt-bindings/clock/sun8i-v3s-ccu.h | 4 +
include/dt-bindings/reset/sun8i-v3s-ccu.h | 3 +
15 files changed, 704 insertions(+), 117 deletions(-)
create mode 100644 arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts
create mode 100644 arch/arm/boot/dts/sun8i-s3-s3l-lichee-zero-plus.dtsi
create mode 100644 arch/arm/boot/dts/sun8i-s3.dtsi
create mode 100644 arch/arm/boot/dts/sun8i-s3l.dtsi
create mode 100644 arch/arm/boot/dts/sun8i-v3.dtsi


 \ /
  Last update: 2019-06-23 06:38    [W:0.130 / U:0.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site