lkml.org 
[lkml]   [2019]   [Jun]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6 1/2] arm64: tegra: add ACONNECT, ADMA and AGIC nodes
From
Date

On 20/06/2019 10:39, Thierry Reding wrote:
> On Wed, Jun 19, 2019 at 05:21:21PM +0530, Sameer Pujar wrote:
>> Add DT nodes for following devices on Tegra186 and Tegra194
>> * ACONNECT
>> * ADMA
>> * AGIC
>>
>> Signed-off-by: Sameer Pujar <spujar@nvidia.com>
>> ---
>> changes in current revision
>> * updated ranges property for aconnect
>> * renamed agic node
>>
>> arch/arm64/boot/dts/nvidia/tegra186.dtsi | 67 ++++++++++++++++++++++++++++++++
>> arch/arm64/boot/dts/nvidia/tegra194.dtsi | 67 ++++++++++++++++++++++++++++++++
>> 2 files changed, 134 insertions(+)
>
> Applied to for-5.3/arm64/dt, thanks.
>
> I ended up deciding to put the aconnect node among the nodes with unit-
> addresses, in the numerical order that it would fit in if the top-level
> aconnect node didn't exist. I think that looks much more consistent in
> the end, even though it's slightly bending the rules that we have.

Thanks. Good point, I had not thought that bit through. Works for me,
especially as the aconnect bus has a ranges property and so is
associated with an address range.

Cheers
Jon

--
nvpublic

\
 
 \ /
  Last update: 2019-06-20 12:02    [W:0.059 / U:5.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site