lkml.org 
[lkml]   [2019]   [Jun]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4] Bluetooth: hci_qca: wcn3990: Drop baudrate change vendor event
On Tue, May 21, 2019 at 12:53:07PM -0700, Matthias Kaehlcke wrote:
> Firmware download to the WCN3990 often fails with a 'TLV response size
> mismatch' error:
>
> [ 133.064659] Bluetooth: hci0: setting up wcn3990
> [ 133.489150] Bluetooth: hci0: QCA controller version 0x02140201
> [ 133.495245] Bluetooth: hci0: QCA Downloading qca/crbtfw21.tlv
> [ 133.507214] Bluetooth: hci0: QCA TLV response size mismatch
> [ 133.513265] Bluetooth: hci0: QCA Failed to download patch (-84)
>
> This is caused by a vendor event that corresponds to an earlier command
> to change the baudrate. The event is not processed in the context of the
> baudrate change and is later interpreted as response to the firmware
> download command (which is also a vendor command), but the driver detects
> that the event doesn't have the expected amount of associated data.
>
> More details:
>
> For the WCN3990 the vendor command for a baudrate change isn't sent as
> synchronous HCI command, because the controller sends the corresponding
> vendor event with the new baudrate. The event is received and decoded
> after the baudrate change of the host port.
>
> Identify the 'unused' event when it is received and don't add it to
> the queue of RX frames.
>
> Signed-off-by: Matthias Kaehlcke <mka@chromium.org>

ping

Firmware download on WCN3990 is know to be broken for about 6
months. Can we please either apply this patch or discuss possible
alternatives? Doing nothing isn't really a great option :/ As
mentioned earlier one alternative could be a delay at the right place
with a comment why it is needed.

Thanks

Matthias

\
 
 \ /
  Last update: 2019-06-21 01:48    [W:0.068 / U:1.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site