lkml.org 
[lkml]   [2019]   [Jun]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH AUTOSEL 4.14 15/31] PCI: PM: Avoid possible suspend-to-idle issue
On Tue, Jun 11, 2019 at 05:25:48PM +0200, Rafael J. Wysocki wrote:
>On 6/8/2019 1:46 PM, Sasha Levin wrote:
>>From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
>>
>>[ Upstream commit d491f2b75237ef37d8867830ab7fad8d9659e853 ]
>>
>>If a PCI driver leaves the device handled by it in D0 and calls
>>pci_save_state() on the device in its ->suspend() or ->suspend_late()
>>callback, it can expect the device to stay in D0 over the whole
>>s2idle cycle. However, that may not be the case if there is a
>>spurious wakeup while the system is suspended, because in that case
>>pci_pm_suspend_noirq() will run again after pci_pm_resume_noirq()
>>which calls pci_restore_state(), via pci_pm_default_resume_early(),
>>so state_saved is cleared and the second iteration of
>>pci_pm_suspend_noirq() will invoke pci_prepare_to_sleep() which
>>may change the power state of the device.
>>
>>To avoid that, add a new internal flag, skip_bus_pm, that will be set
>>by pci_pm_suspend_noirq() when it runs for the first time during the
>>given system suspend-resume cycle if the state of the device has
>>been saved already and the device is still in D0. Setting that flag
>>will cause the next iterations of pci_pm_suspend_noirq() to set
>>state_saved for pci_pm_resume_noirq(), so that it always restores the
>>device state from the originally saved data, and avoid calling
>>pci_prepare_to_sleep() for the device.
>>
>>Fixes: 33e4f80ee69b ("ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idle")
>>Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>>Reviewed-by: Keith Busch <keith.busch@intel.com>
>>Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
>>Signed-off-by: Sasha Levin <sashal@kernel.org>
>>---
>> drivers/pci/pci-driver.c | 17 ++++++++++++++++-
>> include/linux/pci.h | 1 +
>> 2 files changed, 17 insertions(+), 1 deletion(-)
>>
>>diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
>>index ea69b4dbab66..f5d66335fe53 100644
>>--- a/drivers/pci/pci-driver.c
>>+++ b/drivers/pci/pci-driver.c
>>@@ -726,6 +726,8 @@ static int pci_pm_suspend(struct device *dev)
>> struct pci_dev *pci_dev = to_pci_dev(dev);
>> const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
>>+ pci_dev->skip_bus_pm = false;
>>+
>> if (pci_has_legacy_pm_support(pci_dev))
>> return pci_legacy_suspend(dev, PMSG_SUSPEND);
>>@@ -799,7 +801,20 @@ static int pci_pm_suspend_noirq(struct device *dev)
>> }
>> }
>>- if (!pci_dev->state_saved) {
>>+ if (pci_dev->skip_bus_pm) {
>>+ /*
>>+ * The function is running for the second time in a row without
>>+ * going through full resume, which is possible only during
>>+ * suspend-to-idle in a spurious wakeup case. Moreover, the
>>+ * device was originally left in D0, so its power state should
>>+ * not be changed here and the device register values saved
>>+ * originally should be restored on resume again.
>>+ */
>>+ pci_dev->state_saved = true;
>>+ } else if (pci_dev->state_saved) {
>>+ if (pci_dev->current_state == PCI_D0)
>>+ pci_dev->skip_bus_pm = true;
>>+ } else {
>> pci_save_state(pci_dev);
>> if (pci_power_manageable(pci_dev))
>> pci_prepare_to_sleep(pci_dev);
>>diff --git a/include/linux/pci.h b/include/linux/pci.h
>>index 59f4d10568c6..430f3c335446 100644
>>--- a/include/linux/pci.h
>>+++ b/include/linux/pci.h
>>@@ -346,6 +346,7 @@ struct pci_dev {
>> D3cold, not set for devices
>> powered on/off by the
>> corresponding bridge */
>>+ unsigned int skip_bus_pm:1; /* Internal: Skip bus-level PM */
>> unsigned int ignore_hotplug:1; /* Ignore hotplug events */
>> unsigned int hotplug_user_indicators:1; /* SlotCtl indicators
>> controlled exclusively by
>
>This has been reported to be problematic, I wouldn't recommend taking
>it for -stable at this point.

I've dropped it, thank you.

--
Thanks,
Sasha

\
 
 \ /
  Last update: 2019-06-19 23:02    [W:0.067 / U:1.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site