lkml.org 
[lkml]   [2019]   [Jun]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [IMX] [DRM]: suspend/resume support
On Wed, Jun 19, 2019 at 12:05 PM Pintu Agarwal <pintu.ping@gmail.com> wrote:

> Okay. I will surely try it on another IMX6 fresh board.
> With 5.1.11 you mean the kernel from mainline kernel.org
> Or, is there a separate kernel repo for imx6. If yes, please let me know.

5.1.11 from kernel.org

> > Then you can test suspend/resume and see if HDMI hangs or not.
> >
> By this suspend/resume, you mean "suspend-to-ram" or "suspend-to-disk" ?

I tested with "echo mem > /sys/power/state"

> This scenario is not with suspend/resume.
> This hang is, when we make hdmi as a loadable module (.ko) and trying
> to install it after resume.
> In this case, suspend/resume will not come into picture. Not sure why
> it still hangs.
> Do you have any clue for this scenario?

I haven't tried this one.

Please test it with 5.1.11 and if it fails, please report.

\
 
 \ /
  Last update: 2019-06-19 17:12    [W:0.054 / U:3.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site