lkml.org 
[lkml]   [2019]   [Jun]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 1/6] dt-bindings: ap806: add the cluster clock node in the syscon file
Date
Document the device tree binding for the cluster clock controllers found
in the Armada 7K/8K SoCs.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
.../arm/marvell/ap806-system-controller.txt | 25 +++++++++++++++++++
1 file changed, 25 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
index 7b8b8eb0191f..4a3bb9c12312 100644
--- a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
+++ b/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
@@ -143,3 +143,28 @@ ap_syscon1: system-controller@6f8000 {
#thermal-sensor-cells = <1>;
};
};
+
+Cluster clocks:
+---------------
+
+Device Tree Clock bindings for cluster clock of AP806 Marvell. Each
+cluster contain up to 2 CPUs running at the same frequency.
+
+Required properties:
+- compatible: must be "marvell,ap806-cpu-clock";
+- #clock-cells : should be set to 1.
+- clocks : shall be the input parents clock phandle for the clock.
+- reg: register range associated with the cluster clocks
+
+
+ap_syscon1: system-controller@6f8000 {
+ compatible = "marvell,armada-ap806-syscon1", "syscon", "simple-mfd";
+ reg = <0x6f8000 0x1000>;
+
+ cpu_clk: clock-cpu@0 {
+ compatible = "marvell,ap806-cpu-clock";
+ clocks = <&ap_clk 0>, <&ap_clk 1>;
+ #clock-cells = <1>;
+ reg = <0x274 0xa30>;
+ };
+};
--
2.20.1
\
 
 \ /
  Last update: 2019-06-19 16:17    [W:0.049 / U:12.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site