[lkml]   [2019]   [Jun]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 0/5] net: macb: cover letter
Hello !,

This is second version of patch set containing following patches
for Cadence ethernet controller driver.

1. 0001-net-macb-add-phylink-support.patch
Replace phylib API's with phylink API's.
2. 0002-net-macb-add-support-for-sgmii-MAC-PHY-interface.patch
This patch add support for SGMII mode.
3. 0004-net-macb-add-support-for-c45-PHY.patch
This patch is to support C45 PHY.
4. 0005-net-macb-add-support-for-high-speed-interface
This patch add support for 10G USXGMII PCS in fixed mode.
5. 0006-net-macb-parameter-added-to-cadence-ethernet-controller-DT-binding
New parameter added to Cadence ethernet controller DT binding
for USXGMII interface.

1. Dropped patch configuring TI PHY DP83867 from
Cadence PCI wrapper driver.
2. Removed code registering emulated PHY for fixed mode.
3. Code reformatting as per Andrew's and Floren's suggestions.

Parshuram Thombare

Parshuram Thombare (5):
net: macb: add phylink support
net: macb: add support for sgmii MAC-PHY interface
net: macb: add support for c45 PHY
net: macb: add support for high speed interface
net: macb: parameter added to cadence ethernet controller DT binding

.../devicetree/bindings/net/macb.txt | 3 +
drivers/net/ethernet/cadence/Kconfig | 2 +-
drivers/net/ethernet/cadence/macb.h | 135 +++-
drivers/net/ethernet/cadence/macb_main.c | 668 +++++++++++++-----
4 files changed, 628 insertions(+), 180 deletions(-)


 \ /
  Last update: 2019-06-19 10:41    [W:0.065 / U:10.976 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site