lkml.org 
[lkml]   [2019]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v1 5/5] net: stmmac: drop the phy_reset hook from struct stmmac_mdio_bus_data
Date
The phy_reset hook is not set anywhere. Drop it to make
stmmac_mdio_reset() smaller.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 6 ------
include/linux/stmmac.h | 1 -
2 files changed, 7 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index c9454cf4f189..14aa3ee14082 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -247,7 +247,6 @@ int stmmac_mdio_reset(struct mii_bus *bus)
struct net_device *ndev = bus->priv;
struct stmmac_priv *priv = netdev_priv(ndev);
unsigned int mii_address = priv->hw->mii.addr;
- struct stmmac_mdio_bus_data *data = priv->plat->mdio_bus_data;

#ifdef CONFIG_OF
if (priv->device->of_node) {
@@ -277,11 +276,6 @@ int stmmac_mdio_reset(struct mii_bus *bus)
}
#endif

- if (data->phy_reset) {
- netdev_dbg(ndev, "stmmac_mdio_reset: calling phy_reset\n");
- data->phy_reset(priv->plat->bsp_priv);
- }
-
/* This is a workaround for problems with the STE101P PHY.
* It doesn't complete its reset until at least one clock cycle
* on MDC, so perform a dummy mdio read. To be updated for GMAC4
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 96d97c908595..9aad16c379e7 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -92,7 +92,6 @@
/* Platfrom data for platform device structure's platform_data field */

struct stmmac_mdio_bus_data {
- int (*phy_reset)(void *priv);
unsigned int phy_mask;
int *irqs;
int probed_phy_irq;
--
2.22.0
\
 
 \ /
  Last update: 2019-06-15 12:10    [W:0.062 / U:5.732 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site