lkml.org 
[lkml]   [2019]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 4.19 080/118] ARM: dts: imx51: Specify IMX5_CLK_IPG as "ahb" clock to SDMA
Hi!

> [ Upstream commit 918bbde8085ae147a43dcb491953e0dd8f3e9d6a ]
>
> Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
> clock to determine if it needs to configure the IP block as operating
> at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
> clocks as IMX5_CLK_SDMA results in driver incorrectly thinking that
> ratio is 1:1 which results in broken SDMA funtionality. Fix the code
> to specify IMX5_CLK_AHB as "ahb" clock for SDMA, to avoid detecting
> incorrect clock ratio.

I don't see 25aaa75df1e6 commit in stable-4.19.y branch. Is that intentional?

Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-06-15 22:06    [W:0.398 / U:4.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site