lkml.org 
[lkml]   [2019]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 07/10] powerpc/8xx: refactor programming of microcode CPM params.
Date
The CPM registers RCCR and CPMCR1..4 registers has to be set in
accordance with the microcode patch beeing programmed. Lets
define them as part of the patch set and refactor their
programming from that definition.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/platforms/8xx/micropatch.c | 45 ++++++++++++++++++++-------------
1 file changed, 27 insertions(+), 18 deletions(-)

diff --git a/arch/powerpc/platforms/8xx/micropatch.c b/arch/powerpc/platforms/8xx/micropatch.c
index 5e5ac2378d3f..02490c54ebac 100644
--- a/arch/powerpc/platforms/8xx/micropatch.c
+++ b/arch/powerpc/platforms/8xx/micropatch.c
@@ -20,6 +20,14 @@
#include <asm/cpm.h>
#include <asm/cpm1.h>

+struct patch_params {
+ ushort rccr;
+ ushort cpmcr1;
+ ushort cpmcr2;
+ ushort cpmcr3;
+ ushort cpmcr4;
+};
+
/*
* I2C/SPI relocation patch arrays.
*/
@@ -28,6 +36,10 @@

static char patch_name[] __initdata = "I2C/SPI";

+static struct patch_params patch_params __initdata = {
+ 1, 0x802a, 0x8028, 0x802e, 0x802c,
+};
+
static uint patch_2000[] __initdata = {
0x7FFFEFD9, 0x3FFD0000, 0x7FFB49F7, 0x7FF90000,
0x5FEFADF7, 0x5F89ADF7, 0x5FEFAFF7, 0x5F89AFF7,
@@ -82,6 +94,10 @@ static uint patch_2e00[] __initdata = {};

static char patch_name[] __initdata = "I2C/SPI/SMC1";

+static struct patch_params patch_params __initdata = {
+ 3, 0x8080, 0x808a, 0x8028, 0x802a,
+};
+
static uint patch_2000[] __initdata = {
0x3fff0000, 0x3ffd0000, 0x3ffb0000, 0x3ff90000,
0x5f13eff8, 0x5eb5eff8, 0x5f88adf7, 0x5fefadf7,
@@ -200,6 +216,10 @@ static uint patch_2e00[] __initdata = {

static char patch_name[] __initdata = "USB SOF";

+static struct patch_params patch_params __initdata = {
+ 9,
+};
+
static uint patch_2000[] __initdata = {
0x7fff0000, 0x7ffd0000, 0x7ffb0000, 0x49f7ba5b,
0xba383ffb, 0xf9b8b46d, 0xe5ab4e07, 0xaf77bffe,
@@ -239,10 +259,6 @@ void __init cpm_load_patch(cpm8xx_t *cp)
cpm_write_patch(cp, 0xf00, patch_2f00, sizeof(patch_2f00));
cpm_write_patch(cp, 0xe00, patch_2e00, sizeof(patch_2e00));

-#ifdef CONFIG_USB_SOF_UCODE_PATCH
- commproc->cp_rccr = 0x0009;
-#endif /* CONFIG_USB_SOF_UCODE_PATCH */
-
#if defined(CONFIG_I2C_SPI_UCODE_PATCH) || \
defined(CONFIG_I2C_SPI_SMC1_UCODE_PATCH)

@@ -255,26 +271,19 @@ void __init cpm_load_patch(cpm8xx_t *cp)
spp = (struct spi_pram *)&commproc->cp_dparam[PROFF_SPI];
spp->rpbase = (RPBASE + sizeof(iic_t) + 31) & ~31;

-# if defined(CONFIG_I2C_SPI_UCODE_PATCH)
- commproc->cp_cpmcr1 = 0x802a;
- commproc->cp_cpmcr2 = 0x8028;
- commproc->cp_cpmcr3 = 0x802e;
- commproc->cp_cpmcr4 = 0x802c;
- commproc->cp_rccr = 1;
-# endif /* CONFIG_I2C_SPI_UCODE_PATCH */
-
# if defined(CONFIG_I2C_SPI_SMC1_UCODE_PATCH)
- commproc->cp_cpmcr1 = 0x8080;
- commproc->cp_cpmcr2 = 0x808a;
- commproc->cp_cpmcr3 = 0x8028;
- commproc->cp_cpmcr4 = 0x802a;
- commproc->cp_rccr = 3;
-
smp = (smc_uart_t *)&commproc->cp_dparam[PROFF_SMC1];
smp->smc_rpbase = 0x1FC0;
# endif /* CONFIG_I2C_SPI_SMC1_UCODE_PATCH) */

#endif /* some variation of the I2C/SPI patch was selected */

+ commproc->cp_cpmcr1 = patch_params.cpmcr1;
+ commproc->cp_cpmcr2 = patch_params.cpmcr2;
+ commproc->cp_cpmcr3 = patch_params.cpmcr3;
+ commproc->cp_cpmcr4 = patch_params.cpmcr4;
+
+ commproc->cp_rccr = patch_params.rccr;
+
pr_info("%s microcode patch installed\n", patch_name);
}
--
2.13.3
\
 
 \ /
  Last update: 2019-06-13 17:51    [W:0.072 / U:8.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site