lkml.org 
[lkml]   [2019]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 09/10] powerpc/8xx: Use IO accessors in microcode programming.
Date
Change microcode functions to use IO accessors and get rid
of volatile attributes.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/platforms/8xx/micropatch.c | 34 ++++++++++++++++-----------------
1 file changed, 16 insertions(+), 18 deletions(-)

diff --git a/arch/powerpc/platforms/8xx/micropatch.c b/arch/powerpc/platforms/8xx/micropatch.c
index 252db7c90599..986aa6978ab7 100644
--- a/arch/powerpc/platforms/8xx/micropatch.c
+++ b/arch/powerpc/platforms/8xx/micropatch.c
@@ -242,13 +242,7 @@ static void __init cpm_write_patch(cpm8xx_t *cp, int offset, uint *patch, int le

void __init cpm_load_patch(cpm8xx_t *cp)
{
- volatile cpm8xx_t *commproc;
- volatile iic_t *iip;
- volatile struct spi_pram *spp;
- volatile smc_uart_t *smp;
- commproc = cp;
-
- commproc->cp_rccr = 0;
+ out_be16(&cp->cp_rccr, 0);

cpm_write_patch(cp, 0, patch_2000, sizeof(patch_2000));
cpm_write_patch(cp, 0xf00, patch_2f00, sizeof(patch_2f00));
@@ -257,26 +251,30 @@ void __init cpm_load_patch(cpm8xx_t *cp)
if (IS_ENABLED(CONFIG_I2C_SPI_UCODE_PATCH) ||
IS_ENABLED(CONFIG_I2C_SPI_SMC1_UCODE_PATCH)) {
u16 rpbase = 0x500;
+ iic_t *iip;
+ struct spi_pram *spp;

- iip = (iic_t *)&commproc->cp_dparam[PROFF_IIC];
- iip->iic_rpbase = rpbase;
+ iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
+ out_be16(&iip->iic_rpbase, rpbase);

/* Put SPI above the IIC, also 32-byte aligned. */
- spp = (struct spi_pram *)&commproc->cp_dparam[PROFF_SPI];
- spp->rpbase = (rpbase + sizeof(iic_t) + 31) & ~31;
+ spp = (struct spi_pram *)&cp->cp_dparam[PROFF_SPI];
+ out_be16(&spp->rpbase, (rpbase + sizeof(iic_t) + 31) & ~31);

if (IS_ENABLED(CONFIG_I2C_SPI_SMC1_UCODE_PATCH)) {
- smp = (smc_uart_t *)&commproc->cp_dparam[PROFF_SMC1];
- smp->smc_rpbase = 0x1FC0;
+ smc_uart_t *smp;
+
+ smp = (smc_uart_t *)&cp->cp_dparam[PROFF_SMC1];
+ out_be16(&smp->smc_rpbase, 0x1FC0);
}
}

- commproc->cp_cpmcr1 = patch_params.cpmcr1;
- commproc->cp_cpmcr2 = patch_params.cpmcr2;
- commproc->cp_cpmcr3 = patch_params.cpmcr3;
- commproc->cp_cpmcr4 = patch_params.cpmcr4;
+ out_be16(&cp->cp_cpmcr1, patch_params.cpmcr1);
+ out_be16(&cp->cp_cpmcr2, patch_params.cpmcr2);
+ out_be16(&cp->cp_cpmcr3, patch_params.cpmcr3);
+ out_be16(&cp->cp_cpmcr4, patch_params.cpmcr4);

- commproc->cp_rccr = patch_params.rccr;
+ out_be16(&cp->cp_rccr, patch_params.rccr);

pr_info("%s microcode patch installed\n", patch_name);
}
--
2.13.3
\
 
 \ /
  Last update: 2019-06-13 17:51    [W:0.061 / U:4.900 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site