lkml.org 
[lkml]   [2019]   [Jun]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/8] habanalabs: set Goya CPU to use ASIC MMU
Date
This patch configures the Goya CPU to actually go through the MMU for
translation. The configuration is done after the configuration of the
relevant MMU mappings.

Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
---
drivers/misc/habanalabs/goya/goya.c | 23 ++++++++++++++++++++---
1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/misc/habanalabs/goya/goya.c b/drivers/misc/habanalabs/goya/goya.c
index 4e41f2669e6d..9f1f47770afa 100644
--- a/drivers/misc/habanalabs/goya/goya.c
+++ b/drivers/misc/habanalabs/goya/goya.c
@@ -986,9 +986,9 @@ int goya_init_cpu_queues(struct hl_device *hdev)
WREG32(mmPSOC_GLOBAL_CONF_SCRATCHPAD_3, upper_32_bits(eq->bus_address));

WREG32(mmPSOC_GLOBAL_CONF_SCRATCHPAD_8,
- lower_32_bits(hdev->cpu_accessible_dma_address));
+ lower_32_bits(VA_CPU_ACCESSIBLE_MEM_ADDR));
WREG32(mmPSOC_GLOBAL_CONF_SCRATCHPAD_9,
- upper_32_bits(hdev->cpu_accessible_dma_address));
+ upper_32_bits(VA_CPU_ACCESSIBLE_MEM_ADDR));

WREG32(mmPSOC_GLOBAL_CONF_SCRATCHPAD_5, HL_QUEUE_SIZE_IN_BYTES);
WREG32(mmPSOC_GLOBAL_CONF_SCRATCHPAD_4, HL_EQ_SIZE_IN_BYTES);
@@ -3011,7 +3011,13 @@ static void goya_dma_pool_free(struct hl_device *hdev, void *vaddr,
void *goya_cpu_accessible_dma_pool_alloc(struct hl_device *hdev, size_t size,
dma_addr_t *dma_handle)
{
- return hl_fw_cpu_accessible_dma_pool_alloc(hdev, size, dma_handle);
+ void *vaddr;
+
+ vaddr = hl_fw_cpu_accessible_dma_pool_alloc(hdev, size, dma_handle);
+ *dma_handle = (*dma_handle) - hdev->cpu_accessible_dma_address +
+ VA_CPU_ACCESSIBLE_MEM_ADDR;
+
+ return vaddr;
}

void goya_cpu_accessible_dma_pool_free(struct hl_device *hdev, size_t size,
@@ -4667,6 +4673,14 @@ static int goya_mmu_add_mappings_for_device_cpu(struct hl_device *hdev)
}
}

+ goya_mmu_prepare_reg(hdev, mmCPU_IF_ARUSER_OVR, HL_KERNEL_ASID_ID);
+ goya_mmu_prepare_reg(hdev, mmCPU_IF_AWUSER_OVR, HL_KERNEL_ASID_ID);
+ WREG32(mmCPU_IF_ARUSER_OVR_EN, 0x7FF);
+ WREG32(mmCPU_IF_AWUSER_OVR_EN, 0x7FF);
+
+ /* Make sure configuration is flushed to device */
+ RREG32(mmCPU_IF_AWUSER_OVR_EN);
+
goya->device_cpu_mmu_mappings_done = true;

return 0;
@@ -4702,6 +4716,9 @@ void goya_mmu_remove_device_cpu_mappings(struct hl_device *hdev)
if (!goya->device_cpu_mmu_mappings_done)
return;

+ WREG32(mmCPU_IF_ARUSER_OVR_EN, 0);
+ WREG32(mmCPU_IF_AWUSER_OVR_EN, 0);
+
if (!(hdev->cpu_accessible_dma_address & (PAGE_SIZE_2MB - 1))) {
if (hl_mmu_unmap(hdev->kernel_ctx, VA_CPU_ACCESSIBLE_MEM_ADDR,
PAGE_SIZE_2MB))
--
2.17.1
\
 
 \ /
  Last update: 2019-06-11 07:51    [W:0.108 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site