lkml.org 
[lkml]   [2019]   [Jun]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v1 0/3] iio: afe: rescale: Add INFO_PROCESSED support
Date
Hello everyone,

You will find a small series that add the support of processed values
for iio-rescale driver.
Thanks to that, it is possible to read processed values in sysfs instead
of getting only raw and scale values.

Here is an example for a 3v3 voltage reading:
# cat /sys/bus/iio/devices/iio\:device1/in_voltage0_scale
3.791015625
# cat /sys/bus/iio/devices/iio\:device1/in_voltage0_raw
879
# cat /sys/bus/iio/devices/iio\:device1/in_voltage0_input
3332

It is also possible to read directly the processed values using iio-hwmon
driver (see example in patch03):

# cat /sys/class/hwmon/hwmon0/in1_input
3328

I seperated my series in 3 patches:
- Patch01: Move the scale conversion into a function to prepare the
support of IIO_CHAN_INFO_PROCESSED.
- Patch02: Add the support of IIO_CHAN_INFO_PROCESSED.
- Patch03: Add an example of the use of hwmon and voltage-divider nodes
in device-tree.

If you have any feedbacks on it, I will be pleased to read them!

Best regards,
Mylène

Mylène Josserand (3):
iio: afe: rescale: Move scale conversion to new function
iio: afe: rescale: Add support of CHAN_INFO_PROCESSED
dt-bindings: iio: afe: Add hwmon example

.../bindings/iio/afe/voltage-divider.txt | 24 ++++++
drivers/iio/afe/iio-rescale.c | 96 ++++++++++++++++------
2 files changed, 96 insertions(+), 24 deletions(-)

--
2.11.0

\
 
 \ /
  Last update: 2019-06-11 11:58    [W:0.085 / U:4.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site