lkml.org 
[lkml]   [2019]   [Jun]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] PCI: PM: Avoid possible suspend-to-idle issue
From
Date
Hi Rafael,

at 19:02, Rafael J. Wysocki <rjw@rjwysocki.net> wrote:

> On Friday, May 17, 2019 11:08:50 AM CEST Rafael J. Wysocki wrote:
>> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>>
>> If a PCI driver leaves the device handled by it in D0 and calls
>> pci_save_state() on the device in its ->suspend() or ->suspend_late()
>> callback, it can expect the device to stay in D0 over the whole
>> s2idle cycle. However, that may not be the case if there is a
>> spurious wakeup while the system is suspended, because in that case
>> pci_pm_suspend_noirq() will run again after pci_pm_resume_noirq()
>> which calls pci_restore_state(), via pci_pm_default_resume_early(),
>> so state_saved is cleared and the second iteration of
>> pci_pm_suspend_noirq() will invoke pci_prepare_to_sleep() which
>> may change the power state of the device.
>>
>> To avoid that, add a new internal flag, skip_bus_pm, that will be set
>> by pci_pm_suspend_noirq() when it runs for the first time during the
>> given system suspend-resume cycle if the state of the device has
>> been saved already and the device is still in D0. Setting that flag
>> will cause the next iterations of pci_pm_suspend_noirq() to set
>> state_saved for pci_pm_resume_noirq(), so that it always restores the
>> device state from the originally saved data, and avoid calling
>> pci_prepare_to_sleep() for the device.
>>
>> Fixes: 33e4f80ee69b ("ACPI / PM: Ignore spurious SCI wakeups from
>> suspend-to-idle")
>> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

I just found out this patch has a chance to freeze or reboot the system
during suspend cycles.
What information do you need to debug?

Kai-Heng

>> ---
>> drivers/pci/pci-driver.c | 17 ++++++++++++++++-
>> include/linux/pci.h | 1 +
>> 2 files changed, 17 insertions(+), 1 deletion(-)
>>
>> Index: linux-pm/drivers/pci/pci-driver.c
>> ===================================================================
>> --- linux-pm.orig/drivers/pci/pci-driver.c
>> +++ linux-pm/drivers/pci/pci-driver.c
>> @@ -734,6 +734,8 @@ static int pci_pm_suspend(struct device
>> struct pci_dev *pci_dev = to_pci_dev(dev);
>> const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
>>
>> + pci_dev->skip_bus_pm = false;
>> +
>> if (pci_has_legacy_pm_support(pci_dev))
>> return pci_legacy_suspend(dev, PMSG_SUSPEND);
>>
>> @@ -827,7 +829,20 @@ static int pci_pm_suspend_noirq(struct d
>> }
>> }
>>
>> - if (!pci_dev->state_saved) {
>> + if (pci_dev->skip_bus_pm) {
>> + /*
>> + * The function is running for the second time in a row without
>> + * going through full resume, which is possible only during
>> + * suspend-to-idle in a spurious wakeup case. Moreover, the
>> + * device was originally left in D0, so its power state should
>> + * not be changed here and the device register values saved
>> + * originally should be restored on resume again.
>> + */
>> + pci_dev->state_saved = true;
>> + } else if (pci_dev->state_saved) {
>> + if (pci_dev->current_state == PCI_D0)
>> + pci_dev->skip_bus_pm = true;
>> + } else {
>> pci_save_state(pci_dev);
>> if (pci_power_manageable(pci_dev))
>> pci_prepare_to_sleep(pci_dev);
>> Index: linux-pm/include/linux/pci.h
>> ===================================================================
>> --- linux-pm.orig/include/linux/pci.h
>> +++ linux-pm/include/linux/pci.h
>> @@ -344,6 +344,7 @@ struct pci_dev {
>> D3cold, not set for devices
>> powered on/off by the
>> corresponding bridge */
>> + unsigned int skip_bus_pm:1; /* Internal: Skip bus-level PM */
>> unsigned int ignore_hotplug:1; /* Ignore hotplug events */
>> unsigned int hotplug_user_indicators:1; /* SlotCtl indicators
>> controlled exclusively by
>
> Bjorn, I've assumed no concerns or objections from you regarding this one
> and
> queued it up.
>
> If that assumption is incorrect, please let me know.


\
 
 \ /
  Last update: 2019-06-11 10:41    [W:0.106 / U:0.896 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site