lkml.org 
[lkml]   [2019]   [Jun]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH V14 2/5] thermal: of-thermal: add API for getting sensor ID from DT
Date
Hi Eduardo & Rui,

> From: Anson Huang
> Sent: Tuesday, June 11, 2019 8:37 PM
>
> > From: Aisheng Dong
> > Sent: Tuesday, June 11, 2019 7:47 PM
> > Subject: RE: [PATCH V14 2/5] thermal: of-thermal: add API for getting
> > sensor ID from DT
> >
> > Hi Anson,
> >
> > The implementation looks good to me.
> > A few minor comments on the doc:
>
> This patch is pending for so long and even till now I am NOT sure if everyone is
> OK for this change, so I will wait for some comments if there is any, and will
> improve the doc together in next version.
>

The API change seems good to me.
But since this is a core changes, we need your inputs to confirm whether this approach
is ok to you.

So please tell us whether you're fine with this approach.

Regards
Dong Aisheng

> Thanks,
> Anson
>
> >
> > > From: Anson.Huang@nxp.com [mailto:Anson.Huang@nxp.com]
> > > Sent: Monday, June 10, 2019 10:53 AM
> > >
> > > On some platforms like i.MX8QXP, the thermal driver needs a real HW
> > > sensor ID from DT thermal zone, the HW sensor ID is used to get
> > > temperature from SCU firmware, and the virtual sensor ID starting
> > > from
> > > 0 to N is NOT used at all,
> >
> > This API is unware of HW ID or Virtual ID. So we probably no need to
> > mention It here.
> >
> > > this patch adds new API thermal_zone_of_get_sensor_id() to provide
> > > the feature of getting sensor ID from DT thermal zone's node.
> > >
> >
> > "It's useful for thermal driver to register the specific thermal zone
> > devices from DT in a common way."
> >
> > > Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> > > ---
> > > Changes since V13:
> > > - add new API into the thermal API doc.
> > > ---
> > > Documentation/thermal/sysfs-api.txt | 8 +++++
> > > drivers/thermal/of-thermal.c | 66
> > > ++++++++++++++++++++++++++++---------
> > > include/linux/thermal.h | 10 ++++++
> > > 3 files changed, 68 insertions(+), 16 deletions(-)
> > >
> > > diff --git a/Documentation/thermal/sysfs-api.txt
> > > b/Documentation/thermal/sysfs-api.txt
> > > index c3fa500..8d7f1b1 100644
> > > --- a/Documentation/thermal/sysfs-api.txt
> > > +++ b/Documentation/thermal/sysfs-api.txt
> > > @@ -159,6 +159,14 @@ temperature) and throttle appropriate devices.
> > > for the thermal zone device, which might be useful for platform
> > > drivers for temperature calculations.
> > >
> > > +1.1.9 int thermal_zone_of_get_sensor_id(struct device_node *tz_np,
> > > + struct device_node *sensor_np,
> > > + u32 *id)
> > > +
> > > + This interface is used to get the sensor id from thermal sensor's
> > > + phandle argument, it might be necessary for some platforms which
> > > + have specific sensor ID rather than virtual ID from 0 - N.
> >
> > Does below one look better?
> >
> > "This interface is used to get the sensor id from the given thermal
> > zone in DT, which might be useful for thermal drivers to register
> > specific thermal zone device in a common way."
> >
> > > +
> > > 1.2 thermal cooling device interface
> > > 1.2.1 struct thermal_cooling_device
> > > *thermal_cooling_device_register(char
> > > *name,
> > > void *devdata, struct thermal_cooling_device_ops *) diff --git
> > > a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c index
> > > dc5093b..a53792b 100644
> > > --- a/drivers/thermal/of-thermal.c
> > > +++ b/drivers/thermal/of-thermal.c
> > > @@ -449,6 +449,54 @@ thermal_zone_of_add_sensor(struct device_node
> > > *zone, }
> > >
> > > /**
> > > + * thermal_zone_of_get_sensor_id - get sensor ID from a DT thermal
> > > + zone
> > > + * @tz_np: a valid thermal zone device node.
> > > + * @sensor_np: a sensor node of a valid sensor device.
> > > + * @id: a sensor ID pointer will be passed back.
> >
> > the sensor ID returned if success
> >
> > > + *
> > > + * This function will get sensor ID from a given thermal zone node,
> > > + use
> > > + * "thermal-sensors" as list name, and get sensor ID from first
> > > + phandle's
> > > + * argument.
> >
> > "This function will get sensor ID from a given thermal zone node and
> > the sensor get must match the temperature providers @sensor_np."
> >
> > Regards
> > Dong Aisheng
> >
> > > + *
> > > + * Return: 0 on success, proper error code otherwise.
> > > + */
> > > +
> > > +int thermal_zone_of_get_sensor_id(struct device_node *tz_np,
> > > + struct device_node *sensor_np,
> > > + u32 *id)
> > > +{
> > > + struct of_phandle_args sensor_specs;
> > > + int ret;
> > > +
> > > + ret = of_parse_phandle_with_args(tz_np,
> > > + "thermal-sensors",
> > > + "#thermal-sensor-cells",
> > > + 0,
> > > + &sensor_specs);
> > > + if (ret)
> > > + return ret;
> > > +
> > > + if (sensor_specs.np != sensor_np) {
> > > + of_node_put(sensor_specs.np);
> > > + return -ENODEV;
> > > + }
> > > +
> > > + if (sensor_specs.args_count >= 1) {
> > > + *id = sensor_specs.args[0];
> > > + WARN(sensor_specs.args_count > 1,
> > > + "%pOFn: too many cells in sensor specifier %d\n",
> > > + sensor_specs.np, sensor_specs.args_count);
> > > + } else {
> > > + *id = 0;
> > > + }
> > > +
> > > + of_node_put(sensor_specs.np);
> > > +
> > > + return 0;
> > > +}
> > > +EXPORT_SYMBOL_GPL(thermal_zone_of_get_sensor_id);
> > > +
> > > +/**
> > > * thermal_zone_of_sensor_register - registers a sensor to a DT
> > > thermal
> > zone
> > > * @dev: a valid struct device pointer of a sensor device. Must contain
> > > * a valid .of_node, for the sensor node.
> > > @@ -499,36 +547,22 @@ thermal_zone_of_sensor_register(struct device
> > > *dev, int sensor_id, void *data,
> > > sensor_np = of_node_get(dev->of_node);
> > >
> > > for_each_available_child_of_node(np, child) {
> > > - struct of_phandle_args sensor_specs;
> > > int ret, id;
> > >
> > > /* For now, thermal framework supports only 1 sensor per
> > zone */
> > > - ret = of_parse_phandle_with_args(child, "thermal-sensors",
> > > - "#thermal-sensor-cells",
> > > - 0, &sensor_specs);
> > > + ret = thermal_zone_of_get_sensor_id(child, sensor_np, &id);
> > > if (ret)
> > > continue;
> > >
> > > - if (sensor_specs.args_count >= 1) {
> > > - id = sensor_specs.args[0];
> > > - WARN(sensor_specs.args_count > 1,
> > > - "%pOFn: too many cells in sensor specifier %d\n",
> > > - sensor_specs.np, sensor_specs.args_count);
> > > - } else {
> > > - id = 0;
> > > - }
> > > -
> > > - if (sensor_specs.np == sensor_np && id == sensor_id) {
> > > + if (id == sensor_id) {
> > > tzd = thermal_zone_of_add_sensor(child, sensor_np,
> > > data, ops);
> > > if (!IS_ERR(tzd))
> > > tzd->ops->set_mode(tzd,
> > THERMAL_DEVICE_ENABLED);
> > >
> > > - of_node_put(sensor_specs.np);
> > > of_node_put(child);
> > > goto exit;
> > > }
> > > - of_node_put(sensor_specs.np);
> > > }
> > > exit:
> > > of_node_put(sensor_np);
> > > diff --git a/include/linux/thermal.h b/include/linux/thermal.h index
> > > 15a4ca5..5edffe6 100644
> > > --- a/include/linux/thermal.h
> > > +++ b/include/linux/thermal.h
> > > @@ -375,6 +375,9 @@ struct thermal_trip {
> > >
> > > /* Function declarations */
> > > #ifdef CONFIG_THERMAL_OF
> > > +int thermal_zone_of_get_sensor_id(struct device_node *tz_np,
> > > + struct device_node *sensor_np,
> > > + u32 *id);
> > > struct thermal_zone_device *
> > > thermal_zone_of_sensor_register(struct device *dev, int id, void *data,
> > > const struct thermal_zone_of_device_ops
> > *ops); @@
> > > -386,6 +389,13 @@ struct thermal_zone_device
> > > *devm_thermal_zone_of_sensor_register(
> > > void devm_thermal_zone_of_sensor_unregister(struct device *dev,
> > > struct thermal_zone_device *tz);
> > #else
> > > +
> > > +static int thermal_zone_of_get_sensor_id(struct device_node *tz_np,
> > > + struct device_node *sensor_np,
> > > + u32 *id)
> > > +{
> > > + return -ENOENT;
> > > +}
> > > static inline struct thermal_zone_device *
> > > thermal_zone_of_sensor_register(struct device *dev, int id, void *data,
> > > const struct thermal_zone_of_device_ops
> > *ops)
> > > --
> > > 2.7.4

\
 
 \ /
  Last update: 2019-06-12 05:25    [W:0.099 / U:2.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site