lkml.org 
[lkml]   [2019]   [Jun]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/2] drm/rockchip: dw_hdmi: Handle suspend/resume
On Fri, Jun 07, 2019 at 02:06:03PM -0400, Sean Paul wrote:
> On Thu, Jun 06, 2019 at 03:58:21PM -0700, Doug Anderson wrote:
> > Hi,
> >
> > On Thu, Jun 6, 2019 at 9:42 AM Sean Paul <sean@poorly.run> wrote:
> > >
> > > On Tue, Jun 04, 2019 at 01:42:07PM -0700, Douglas Anderson wrote:
> > > > On Rockchip rk3288-based Chromebooks when you do a suspend/resume
> > > > cycle:
> > > >
> > > > 1. You lose the ability to detect an HDMI device being plugged in.
> > > >
> > > > 2. If you're using the i2c bus built in to dw_hdmi then it stops
> > > > working.
> > > >
> > > > Let's call the core dw-hdmi's suspend/resume functions to restore
> > > > things.
> > > >
> > > > NOTE: in downstream Chrome OS (based on kernel 3.14) we used the
> > > > "late/early" versions of suspend/resume because we found that the VOP
> > > > was sometimes resuming before dw_hdmi and then calling into us before
> > > > we were fully resumed. For now I have gone back to the normal
> > > > suspend/resume because I can't reproduce the problems.
> > > >
> > > > Signed-off-by: Douglas Anderson <dianders@chromium.org>
> > > > ---
> > > >
> > > > Changes in v3:
> > > > - dw_hdmi_resume() is now a void function (Laurent)
> > > >
> > > > Changes in v2:
> > > > - Add forgotten static (Laurent)
> > > > - No empty stub for suspend (Laurent)
> > > >
> > > > drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 14 ++++++++++++++
> > > > 1 file changed, 14 insertions(+)
> > > >
> > > > diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> > > > index 4cdc9f86c2e5..7bb0f922b303 100644
> > > > --- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> > > > +++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> > > > @@ -542,11 +542,25 @@ static int dw_hdmi_rockchip_remove(struct platform_device *pdev)
> > > > return 0;
> > > > }
> > > >
> > > > +static int __maybe_unused dw_hdmi_rockchip_resume(struct device *dev)
> > > > +{
> > > > + struct rockchip_hdmi *hdmi = dev_get_drvdata(dev);
> > > > +
> > > > + dw_hdmi_resume(hdmi->hdmi);
> > >
> > > The rockchip driver is already using the atomic suspend/resume helpers (via the
> > > modeset helpers). Would you be able to accomplish the same thing by just moving
> > > this call into the encoder enable callback?
> > >
> > > .enable is called on resume via the atomic commit framework, so everything is
> > > ordered properly. Of course, this would reset the dw_hdmi bridge on each enable,
> > > but I don't think that would be a problem?
> >
> > I tried and it sorta kinda half worked, but...
> >
> > 1. One of the problems solved by this patch is making "hot plug
> > detect" work after suspend / resume. AKA: if you have nothing plugged
> > in to the HDMI port and then suspend/resume you need to be able to
> > detect when something is plugged in. When nothing is plugged in then
> > the ".enable" isn't called at resume time.
> >
>
> Ahh, ok. So we've hit this with other bridges/dongles as well, and yeah the
> solution is to keep the bridge powered up enough to detect hotplug, so you would
> need to do some work in .resume
>
> Usually there's a second stage of enable where you power things on more fully
> and that is done in .enable
>
> > 2. I'm not so convinced about the whole ordering being correct.
> > Unfortunately on my system (Chrome OS running the chromeos-4.19
> > kernel) we end up getting an i2c transfer before the ".enable" is
> > called. I put a dump_stack() in the i2c transfer:
> >
> > [ 42.212516] CPU: 0 PID: 1479 Comm: DrmThread Tainted: G C
> > 4.19.47 #60
> > [ 42.221182] Hardware name: Rockchip (Device Tree)
> > [ 42.226449] [<c0211a64>] (unwind_backtrace) from [<c020cf0c>]
> > (show_stack+0x20/0x24)
> > [ 42.235114] [<c020cf0c>] (show_stack) from [<c0a1b8d4>]
> > (dump_stack+0x84/0xa4)
> > [ 42.243195] [<c0a1b8d4>] (dump_stack) from [<c067d7c4>]
> > (dw_hdmi_i2c_wait+0x6c/0xa8)
> > [ 42.251858] [<c067d7c4>] (dw_hdmi_i2c_wait) from [<c067d9a8>]
> > (dw_hdmi_i2c_xfer+0x1a8/0x30c)
> > [ 42.261298] [<c067d9a8>] (dw_hdmi_i2c_xfer) from [<c0798704>]
> > (__i2c_transfer+0x3a8/0x5d8)
> > [ 42.270543] [<c0798704>] (__i2c_transfer) from [<c07989c8>]
> > (i2c_transfer+0x94/0xc4)
> > [ 42.279204] [<c07989c8>] (i2c_transfer) from [<c064e6b0>]
> > (drm_do_probe_ddc_edid+0xbc/0x11c)
> > [ 42.288642] [<c064e6b0>] (drm_do_probe_ddc_edid) from [<c064e744>]
> > (drm_probe_ddc+0x34/0x5c)
> > [ 42.298081] [<c064e744>] (drm_probe_ddc) from [<c0651b98>]
> > (drm_get_edid+0x60/0x2e0)
> > [ 42.306743] [<c0651b98>] (drm_get_edid) from [<c067d710>]
> > (dw_hdmi_connector_get_modes+0x30/0x78)
> > [ 42.316669] [<c067d710>] (dw_hdmi_connector_get_modes) from
> > [<c0634f38>] (drm_helper_probe_single_connector_modes+0x218/0x5c0)
> > [ 42.329413] [<c0634f38>] (drm_helper_probe_single_connector_modes)
> > from [<c065b38c>] (drm_mode_getconnector+0x144/0x418)
> > [ 42.341573] [<c065b38c>] (drm_mode_getconnector) from [<c0646844>]
> > (drm_ioctl_kernel+0xa0/0xf0)
> > [ 42.351303] [<c0646844>] (drm_ioctl_kernel) from [<c0646d34>]
> > (drm_ioctl+0x32c/0x3c0)
> > [ 42.360063] [<c0646d34>] (drm_ioctl) from [<c03ed0cc>] (vfs_ioctl+0x28/0x44)
> > [ 42.367946] [<c03ed0cc>] (vfs_ioctl) from [<c03edee8>]
> > (do_vfs_ioctl+0x718/0x8b0)
> > [ 42.376315] [<c03edee8>] (do_vfs_ioctl) from [<c03ee0dc>]
> > (ksys_ioctl+0x5c/0x84)
> > [ 42.384587] [<c03ee0dc>] (ksys_ioctl) from [<c03ee11c>] (sys_ioctl+0x18/0x1c)
> > [ 42.392570] [<c03ee11c>] (sys_ioctl) from [<c02011d4>]
> > (__sys_trace_return+0x0/0x10)
> >
> > ...I see several transfers fail and then finally a few seconds later
> > finally see the .enable call:
>
> This is usually solved by wrapping the code in detect() with an enable/disable
> pair to turn on enough circuitry to do the i2c writes for edid read.
>
> >
> > [ 44.021501] DOUG: dw_hdmi_rockchip_encoder_enable start
> > [ 44.027792] DOUG: dw_hdmi_rockchip_encoder_enable end
> >
> > I can gather more info if it's useful.
> >
> > ===
> >
> > ...any chance we can keep the patch as-is, or do you have ideas of how
> > to solve the above problems?
>
> Yeah, given the context I think this is Ok to apply as-is. Maybe we could
> shave out some of the work done in resume and move it to a helper called in
> enable/detect, but I don't think it's necessary to hold up getting things
> working.
>
> Thanks for the detailed explanation (as always :)
>
> Reviewed-by: Sean Paul <sean@poorly.run>

Applied both patches to drm-misc-next, thank you!

Sean

>
>
> >
> >
> > Thanks!
> >
> > -Doug
>
> --
> Sean Paul, Software Engineer, Google / Chromium OS
> > [ 42.351303] [<c0646844>] (drm_ioctl_kernel) from [<c0646d34>]
> > (drm_ioctl+0x32c/0x3c0)
> > [ 42.360063] [<c0646d34>] (drm_ioctl) from [<c03ed0cc>] (vfs_ioctl+0x28/0x44)
> > [ 42.367946] [<c03ed0cc>] (vfs_ioctl) from [<c03edee8>]
> > (do_vfs_ioctl+0x718/0x8b0)
> > [ 42.376315] [<c03edee8>] (do_vfs_ioctl) from [<c03ee0dc>]
> > (ksys_ioctl+0x5c/0x84)
> > [ 42.384587] [<c03ee0dc>] (ksys_ioctl) from [<c03ee11c>] (sys_ioctl+0x18/0x1c)
> > [ 42.392570] [<c03ee11c>] (sys_ioctl) from [<c02011d4>]
> > (__sys_trace_return+0x0/0x10)
> >
> > ...I see several transfers fail and then finally a few seconds later
> > finally see the .enable call:
> >
> > [ 44.021501] DOUG: dw_hdmi_rockchip_encoder_enable start
> > [ 44.027792] DOUG: dw_hdmi_rockchip_encoder_enable end
> >
> > I can gather more info if it's useful.
> >
> > ===
> >
> > ...any chance we can keep the patch as-is, or do you have ideas of how
> > to solve the above problems?
> >
> >
> > Thanks!
> >
> > -Doug
>
> --
> Sean Paul, Software Engineer, Google / Chromium OS

--
Sean Paul, Software Engineer, Google / Chromium OS

\
 
 \ /
  Last update: 2019-06-11 22:06    [W:0.091 / U:1.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site