Messages in this thread Patch in this message |  | | From | <> | Subject | [PATCH v1 2/4] dt-bindings: net: bluetooth: add clock property to UART-based device | Date | Sun, 2 Jun 2019 09:04:15 +0800 |
| |
From: Sean Wang <sean.wang@mediatek.com>
Some board requires explicitily control external osscilator via GPIO. So, add a clock property for an external oscillator for the device.
Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- Documentation/devicetree/bindings/net/mediatek-bluetooth.txt | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt index 14f23b354a6d..112011c51d5e 100644 --- a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt +++ b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt @@ -73,6 +73,10 @@ Optional properties: - reset-gpios: GPIO used to reset the device whose initial state keeps low, if the GPIO is missing, then board-level design should be guaranteed. +- clocks: Should be the clock specifiers corresponding to the entry in + clock-names property. If the clock is missing, then board-level + design should be guaranteed. +- clock-names: Should contain "osc" entry for the external oscillator. - current-speed: Current baud rate of the device whose defaults to 921600 Example: -- 2.17.1
|  |