lkml.org 
[lkml]   [2019]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH net-next 00/11] net: stmmac: Selftests
On Wed, May 08, 2019 at 09:51:00AM +0200, Jose Abreu wrote:
> [ Submitting with net-next closed for proper review and testing. ]
>
> This introduces selftests support in stmmac driver. We add 4 basic sanity
> checks and MAC loopback support for all cores within the driver. This way
> more tests can easily be added in the future and can be run in virtually
> any MAC/GMAC/QoS/XGMAC platform.
>
> Having this we can find regressions and missing features in the driver
> while at the same time we can check if the IP is correctly working.
>
> We have been using this for some time now and I do have more tests to
> submit in the feature. My experience is that although writing the tests
> adds more development time, the gain results are obvious.
>
> I let this feature optional within the driver under a Kconfig option.
>
> For this series the output result will be something like this
> (e.g. for dwmac1000):
> ----
> # ethtool -t eth0
> The test result is PASS
> The test extra info:
> 1. MAC Loopback 0
> 2. PHY Loopback -95
> 3. MMC Counters 0
> 4. EEE -95
> 5. Hash Filter MC 0
> 6. Perfect Filter UC 0
> 7. Flow Control 0
> ----
>
> (Error code -95 means EOPNOTSUPP in current HW).
>

Hello

I have started to patch dwmac_sun8i for using your patchset and get the following:
The test result is FAIL
The test extra info:
1. MAC Loopback 0
2. PHY Loopback -95
3. MMC Counters -95
4. EEE -95
5. Hash Filter MC 0
6. Perfect Filter UC 1
7. Flow Control -95

What means 1 for "Perfect Filter UC" ?

I have added my patch below

Regards

--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -976,6 +976,18 @@ static void sun8i_dwmac_exit(struct platform_device *pdev, void *priv)
regulator_disable(gmac->regulator);
}

+static void sun8i_dwmac_set_mac_loopback(void __iomem *ioaddr, bool enable)
+{
+ u32 value = readl(ioaddr + EMAC_BASIC_CTL0);
+
+ if (enable)
+ value |= EMAC_LOOPBACK;
+ else
+ value &= ~EMAC_LOOPBACK;
+
+ writel(value, ioaddr + EMAC_BASIC_CTL0);
+}
+
static const struct stmmac_ops sun8i_dwmac_ops = {
.core_init = sun8i_dwmac_core_init,
.set_mac = sun8i_dwmac_set_mac,
@@ -985,6 +997,7 @@ static const struct stmmac_ops sun8i_dwmac_ops = {
.flow_ctrl = sun8i_dwmac_flow_ctrl,
.set_umac_addr = sun8i_dwmac_set_umac_addr,
.get_umac_addr = sun8i_dwmac_get_umac_addr,
+ .set_mac_loopback = sun8i_dwmac_set_mac_loopback,
};

static struct mac_device_info *sun8i_dwmac_setup(void *ppriv)
\
 
 \ /
  Last update: 2019-05-09 11:05    [W:0.131 / U:18.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site