lkml.org 
[lkml]   [2019]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 2/3] iio: dps310: Temperature measurement errata
On Thu, May 9, 2019 at 11:17 PM Eddie James <eajames@linux.vnet.ibm.com> wrote:
>
>
> On 5/8/19 10:09 PM, Matt Ranostay wrote:
> > On Thu, May 9, 2019 at 3:36 AM Eddie James <eajames@linux.ibm.com> wrote:
> >> From: Christopher Bostic <cbostic@linux.vnet.ibm.com>
> >>
> >> Add a manufacturer's suggested workaround to deal with early revisions
> >> of chip that don't indicate correct temperature. Readings can be in the
> >> ~60C range when they should be in the ~20's.
> >>
> >> Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
> >> Signed-off-by: Joel Stanley <joel@jms.id.au>
> >> Signed-off-by: Eddie James <eajames@linux.ibm.com>
> >> ---
> >> drivers/iio/pressure/dps310.c | 51 ++++++++++++++++++++++++++++++++++++++++++-
> >> 1 file changed, 50 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/iio/pressure/dps310.c b/drivers/iio/pressure/dps310.c
> >> index 7afaa88..c42808e 100644
> >> --- a/drivers/iio/pressure/dps310.c
> >> +++ b/drivers/iio/pressure/dps310.c
> >> @@ -221,6 +221,9 @@ static bool dps310_is_writeable_reg(struct device *dev, unsigned int reg)
> >> case DPS310_MEAS_CFG:
> >> case DPS310_CFG_REG:
> >> case DPS310_RESET:
> >> + case 0x0e:
> >> + case 0x0f:
> >> + case 0x62:
> > What is with the magic values? Are they not documented to what they
> > are, and hence not defining enum values for them?
> >
> > - Matt
>
>
> Thats correct. These don't show up in the data sheet so I left them as
> raw values. Chris, do you know what the source for these values was?

Please at least make a comment in the code stating as much.

- Matt
>
> Thanks,
>
> Eddie
>
>
> >
> >> return true;
> >> default:
> >> return false;
> >> @@ -237,6 +240,7 @@ static bool dps310_is_volatile_reg(struct device *dev, unsigned int reg)
> >> case DPS310_TMP_B1:
> >> case DPS310_TMP_B2:
> >> case DPS310_MEAS_CFG:
> >> + case 0x32:
> >> return true;
> >> default:
> >> return false;
> >> @@ -314,7 +318,7 @@ static int dps310_read_raw(struct iio_dev *iio,
> >> .writeable_reg = dps310_is_writeable_reg,
> >> .volatile_reg = dps310_is_volatile_reg,
> >> .cache_type = REGCACHE_RBTREE,
> >> - .max_register = 0x29,
> >> + .max_register = 0x62,
> >> };
> >>
> >> static const struct iio_info dps310_info = {
> >> @@ -322,6 +326,47 @@ static int dps310_read_raw(struct iio_dev *iio,
> >> .write_raw = dps310_write_raw,
> >> };
> >>
> >> +/*
> >> + * Some verions of chip will read temperatures in the ~60C range when
> >> + * its actually ~20C. This is the manufacturer recommended workaround
> >> + * to correct the issue.
> >> + */
> >> +static int dps310_temp_workaround(struct dps310_data *data)
> >> +{
> >> + int r, reg;
> >> +
> >> + r = regmap_read(data->regmap, 0x32, &reg);
> >> + if (r < 0)
> >> + return r;
> >> +
> >> + /*
> >> + * If bit 1 is set then the device is okay, and the workaround does not
> >> + * need to be applied
> >> + */
> >> + if (reg & BIT(1))
> >> + return 0;
> >> +
> >> + r = regmap_write(data->regmap, 0x0e, 0xA5);
> >> + if (r < 0)
> >> + return r;
> >> +
> >> + r = regmap_write(data->regmap, 0x0f, 0x96);
> >> + if (r < 0)
> >> + return r;
> >> +
> >> + r = regmap_write(data->regmap, 0x62, 0x02);
> >> + if (r < 0)
> >> + return r;
> >> +
> >> + r = regmap_write(data->regmap, 0x0e, 0x00);
> >> + if (r < 0)
> >> + return r;
> >> +
> >> + r = regmap_write(data->regmap, 0x0f, 0x00);
> >> +
> >> + return r;
> >> +}
> >> +
> >> static int dps310_probe(struct i2c_client *client,
> >> const struct i2c_device_id *id)
> >> {
> >> @@ -383,6 +428,10 @@ static int dps310_probe(struct i2c_client *client,
> >> if (r < 0)
> >> goto err;
> >>
> >> + r = dps310_temp_workaround(data);
> >> + if (r < 0)
> >> + return r;
> >> +
> >> r = devm_iio_device_register(&client->dev, iio);
> >> if (r)
> >> goto err;
> >> --
> >> 1.8.3.1
> >>
>

\
 
 \ /
  Last update: 2019-05-10 04:21    [W:0.057 / U:19.964 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site