[lkml]   [2019]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 0/4] Add reset controller support for BM1880 SoC

This patchset adds reset controller support for Bitmain BM1880 SoC.
BM1880 SoC has two reset controllers each controlling reset lines of
different peripherals. And the reset-simple driver has been reused here.

This patchset has been tested on 96Boards Sophon Edge board.


Changes in v2:

As per review from Philipp:

* Reused reset_simple_active_low struct instead of a new one for bm1880
* Splitted the SPDX license change to a separate commit
* Added Reviewed-by tags from Rob and Philipp

Manivannan Sadhasivam (4):
dt-bindings: reset: Add devicetree binding for BM1880 reset controller
arm64: dts: bitmain: Add reset controller support for BM1880 SoC
reset: Add reset controller support for BM1880 SoC
reset: Switch to SPDX license identifier for reset-simple

.../bindings/reset/bitmain,bm1880-reset.txt | 18 +++
arch/arm64/boot/dts/bitmain/bm1880.dtsi | 17 +++
drivers/reset/Kconfig | 3 +-
drivers/reset/reset-simple.c | 8 +-
.../dt-bindings/reset/bitmain,bm1880-reset.h | 106 ++++++++++++++++++
5 files changed, 146 insertions(+), 6 deletions(-)
create mode 100644 Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt
create mode 100644 include/dt-bindings/reset/bitmain,bm1880-reset.h


 \ /
  Last update: 2019-05-08 18:55    [W:0.055 / U:1.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site