lkml.org 
[lkml]   [2019]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v7 13/23] iommu/smmuv3: Implement attach/detach_pasid_table
From
Date
On 08/04/2019 13:19, Eric Auger wrote:
> On attach_pasid_table() we program STE S1 related info set
> by the guest into the actual physical STEs. At minimum
> we need to program the context descriptor GPA and compute
> whether the stage1 is translated/bypassed or aborted.
>
> Signed-off-by: Eric Auger <eric.auger@redhat.com>
>
> ---
> v6 -> v7:
> - check versions and comment the fact we don't need to take
> into account s1dss and s1fmt
> v3 -> v4:
> - adapt to changes in iommu_pasid_table_config
> - different programming convention at s1_cfg/s2_cfg/ste.abort
>
> v2 -> v3:
> - callback now is named set_pasid_table and struct fields
> are laid out differently.
>
> v1 -> v2:
> - invalidate the STE before changing them
> - hold init_mutex
> - handle new fields
> ---
> drivers/iommu/arm-smmu-v3.c | 121 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 121 insertions(+)
>
> diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
> index e22e944ffc05..1486baf53425 100644
> --- a/drivers/iommu/arm-smmu-v3.c
> +++ b/drivers/iommu/arm-smmu-v3.c
> @@ -2207,6 +2207,125 @@ static void arm_smmu_put_resv_regions(struct device *dev,
> kfree(entry);
> }
>
> +static int arm_smmu_attach_pasid_table(struct iommu_domain *domain,
> + struct iommu_pasid_table_config *cfg)
> +{
> + struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
> + struct arm_smmu_master_data *entry;
> + struct arm_smmu_s1_cfg *s1_cfg;
> + struct arm_smmu_device *smmu;
> + unsigned long flags;
> + int ret = -EINVAL;
> +
> + if (cfg->format != IOMMU_PASID_FORMAT_SMMUV3)
> + return -EINVAL;
> +
> + if (cfg->version != PASID_TABLE_CFG_VERSION_1 ||
> + cfg->smmuv3.version != PASID_TABLE_SMMUV3_CFG_VERSION_1)
> + return -EINVAL;
> +
> + mutex_lock(&smmu_domain->init_mutex);
> +
> + smmu = smmu_domain->smmu;
> +
> + if (!smmu)
> + goto out;
> +
> + if (!((smmu->features & ARM_SMMU_FEAT_TRANS_S1) &&
> + (smmu->features & ARM_SMMU_FEAT_TRANS_S2))) {
> + dev_info(smmu_domain->smmu->dev,
> + "does not implement two stages\n");
> + goto out;
> + }

That check is redundant (and frankly looks a little bit spammy). If the
one below is not enough, there is a problem elsewhere - if it's possible
for smmu_domain->stage to ever get set to ARM_SMMU_DOMAIN_NESTED without
both stages of translation present, we've already gone fundamentally wrong.

> +
> + if (smmu_domain->stage != ARM_SMMU_DOMAIN_NESTED)
> + goto out;
> +
> + switch (cfg->config) {
> + case IOMMU_PASID_CONFIG_ABORT:
> + spin_lock_irqsave(&smmu_domain->devices_lock, flags);
> + list_for_each_entry(entry, &smmu_domain->devices, list) {
> + entry->ste.s1_cfg = NULL;
> + entry->ste.abort = true;
> + arm_smmu_install_ste_for_dev(entry->dev->iommu_fwspec);
> + }
> + spin_unlock_irqrestore(&smmu_domain->devices_lock, flags);
> + ret = 0;
> + break;
> + case IOMMU_PASID_CONFIG_BYPASS:
> + spin_lock_irqsave(&smmu_domain->devices_lock, flags);
> + list_for_each_entry(entry, &smmu_domain->devices, list) {
> + entry->ste.s1_cfg = NULL;
> + entry->ste.abort = false;
> + arm_smmu_install_ste_for_dev(entry->dev->iommu_fwspec);
> + }
> + spin_unlock_irqrestore(&smmu_domain->devices_lock, flags);
> + ret = 0;
> + break;
> + case IOMMU_PASID_CONFIG_TRANSLATE:
> + /*
> + * we currently support a single CD so s1fmt and s1dss
> + * fields are also ignored
> + */
> + if (cfg->pasid_bits)
> + goto out;
> +
> + s1_cfg = &smmu_domain->s1_cfg;
> + s1_cfg->cdptr_dma = cfg->base_ptr;
> +
> + spin_lock_irqsave(&smmu_domain->devices_lock, flags);
> + list_for_each_entry(entry, &smmu_domain->devices, list) {
> + entry->ste.s1_cfg = s1_cfg;

Either we reject valid->valid transitions outright, or we need to remove
and invalidate the existing S1 context from the STE at this point, no?

> + entry->ste.abort = false;
> + arm_smmu_install_ste_for_dev(entry->dev->iommu_fwspec);
> + }
> + spin_unlock_irqrestore(&smmu_domain->devices_lock, flags);
> + ret = 0;
> + break;
> + default:
> + break;
> + }
> +out:
> + mutex_unlock(&smmu_domain->init_mutex);
> + return ret;
> +}
> +
> +static void arm_smmu_detach_pasid_table(struct iommu_domain *domain)
> +{
> + struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
> + struct arm_smmu_master_data *entry;
> + struct arm_smmu_device *smmu;
> + unsigned long flags;
> +
> + mutex_lock(&smmu_domain->init_mutex);
> +
> + smmu = smmu_domain->smmu;
> +
> + if (!smmu)
> + return;
> +
> + if (!((smmu->features & ARM_SMMU_FEAT_TRANS_S1) &&
> + (smmu->features & ARM_SMMU_FEAT_TRANS_S2))) {
> + dev_info(smmu_domain->smmu->dev,
> + "does not implement two stages\n");
> + return;
> + }

Same comment as before.

Robin.

> +
> + if (smmu_domain->stage != ARM_SMMU_DOMAIN_NESTED)
> + return;
> +
> + spin_lock_irqsave(&smmu_domain->devices_lock, flags);
> + list_for_each_entry(entry, &smmu_domain->devices, list) {
> + entry->ste.s1_cfg = NULL;
> + entry->ste.abort = true;
> + arm_smmu_install_ste_for_dev(entry->dev->iommu_fwspec);
> + }
> + spin_unlock_irqrestore(&smmu_domain->devices_lock, flags);
> +
> + memset(&smmu_domain->s1_cfg, 0, sizeof(struct arm_smmu_s1_cfg));
> + mutex_unlock(&smmu_domain->init_mutex);
> +}
> +
> static struct iommu_ops arm_smmu_ops = {
> .capable = arm_smmu_capable,
> .domain_alloc = arm_smmu_domain_alloc,
> @@ -2225,6 +2344,8 @@ static struct iommu_ops arm_smmu_ops = {
> .of_xlate = arm_smmu_of_xlate,
> .get_resv_regions = arm_smmu_get_resv_regions,
> .put_resv_regions = arm_smmu_put_resv_regions,
> + .attach_pasid_table = arm_smmu_attach_pasid_table,
> + .detach_pasid_table = arm_smmu_detach_pasid_table,
> .pgsize_bitmap = -1UL, /* Restricted during device attach */
> };
>
>

\
 
 \ /
  Last update: 2019-05-08 16:38    [W:0.136 / U:36.932 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site