[lkml]   [2019]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v8 0/5] support a new rk80x pmic-variants (rk817 and rk809)
I've picked up and rebased Tony's patch-series for rk809 and rk817.
From the last iteration it looks like the regulator-portion did
fall through the cracks, the other patches seem to be sufficiently

The regulator-patch could either just be picked alone to the regulator-
tree or with an Ack go through the mfd tree with the other patches.

Original cover-letter + changelog follows:

Most of functions and registers of the rk817 and rk808 are the same,
so they can share allmost all codes.

Their specifications are as follows:
1) The RK809 and RK809 consist of 5 DCDCs, 9 LDOs and have the same
for these components except dcdc5.
2) The dcdc5 is a boost dcdc for RK817 and is a buck for RK809.
3) The RK817 has one switch but The Rk809 has two.

Changes in V2:
1. initialize the pm_pwroff_fn to NULL.
2. use EXPORT_SYMBOL_GPL to export pm_power_off_prepare.
3. change patch 2/3/4/5 subjects.

Changes in V3
1. change patch 4 subjects
2. replace pr_ with dev_ for printing in patch 2
3. modify switch1 and switch2 configs in patch 2
4. explain gpio information for rk809 and rk817 in patch 4

Changes in V4:
1. modify some codes for patch 2 and patch 5 according to comments
2. add reviewer mail lists for patch 3 and 4

Changes in V5:
modify some codes for patch 1 according to reveiw comments for v3.
1) remove the pm_power_off_prepare() and replace with shutdown
call-back from syscore
2) move the macro REGMAP_IRQ_M into the regmap.h and rename it
3) make some dev_warn() log clear

Changes in V6:
modify some codes according to reveiw comments for v5.

Changes in V7:
modify some codes for patch 2 according to reveiw comments.

Changes in V8:
- [Heiko] rebase onto current mainline
- [Heiko] add some tags from Lee so that he can keep track of what
he reviewed

Tony Xie (5):
mfd: rk808: Add RK817 and RK809 support
regulator: rk808: add RK809 and RK817 support.
dt-bindings: mfd: rk808: Add binding information for RK809 and RK817.
rtc: rk808: add RK809 and RK817 support.
clk: RK808: add RK809 and RK817 support.

.../devicetree/bindings/mfd/rk808.txt | 44 ++
drivers/clk/Kconfig | 9 +-
drivers/clk/clk-rk808.c | 64 +-
drivers/mfd/Kconfig | 6 +-
drivers/mfd/rk808.c | 192 ++++-
drivers/regulator/Kconfig | 4 +-
drivers/regulator/rk808-regulator.c | 657 +++++++++++++++++-
drivers/rtc/Kconfig | 4 +-
drivers/rtc/rtc-rk808.c | 68 +-
include/linux/mfd/rk808.h | 175 +++++
10 files changed, 1165 insertions(+), 58 deletions(-)


 \ /
  Last update: 2019-05-08 16:38    [W:0.084 / U:8.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site