lkml.org 
[lkml]   [2019]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] watchdog: sama5d4: fix WDD value to be always set to max
Date
From: Eugen Hristev <eugen.hristev@microchip.com>

WDD value must be always set to max (0xFFF) otherwise the hardware
block will reset the board on the first ping of the watchdog.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
drivers/watchdog/sama5d4_wdt.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/watchdog/sama5d4_wdt.c b/drivers/watchdog/sama5d4_wdt.c
index 1e93c1b..d495336 100644
--- a/drivers/watchdog/sama5d4_wdt.c
+++ b/drivers/watchdog/sama5d4_wdt.c
@@ -111,9 +111,7 @@ static int sama5d4_wdt_set_timeout(struct watchdog_device *wdd,
u32 value = WDT_SEC2TICKS(timeout);

wdt->mr &= ~AT91_WDT_WDV;
- wdt->mr &= ~AT91_WDT_WDD;
wdt->mr |= AT91_WDT_SET_WDV(value);
- wdt->mr |= AT91_WDT_SET_WDD(value);

/*
* WDDIS has to be 0 when updating WDD/WDV. The datasheet states: When
@@ -251,7 +249,7 @@ static int sama5d4_wdt_probe(struct platform_device *pdev)

timeout = WDT_SEC2TICKS(wdd->timeout);

- wdt->mr |= AT91_WDT_SET_WDD(timeout);
+ wdt->mr |= AT91_WDT_SET_WDD(WDT_SEC2TICKS(MAX_WDT_TIMEOUT));
wdt->mr |= AT91_WDT_SET_WDV(timeout);

ret = sama5d4_wdt_init(wdt);
--
2.7.4
\
 
 \ /
  Last update: 2019-05-08 16:16    [W:0.054 / U:1.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site