[lkml]   [2019]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [RFC PATCH v1 6/6] soc/tegra: regulators: Add regulators coupler for Tegra30
08.05.2019 10:58, Mark Brown пишет:
> On Sun, Apr 14, 2019 at 08:59:39PM +0300, Dmitry Osipenko wrote:
>> Add regulators coupler for Tegra30 SoC's that performs voltage balancing
>> of a coupled regulators and thus provides voltage scaling functionality.
> Same here, what are the requirements this is implementing?

There are two coupled regulators: CPU and CORE.


1) The max-spread voltage is 300mV.

2) CORE voltage must be higher than the CPU by at least N mV, where N
varies depending on the CPU voltage.

3) There is a constraint on the maximum CORE voltage depending on
hardware model/revision (cpu_speedo_id) where a higher voltages
apparently may cause physical damage, so it's better to hardcode the
limitation in the code rather than to rely on a board's device-tree
description. This constraint is quite vaguely defined in the downstream
kernel, I'm not really sure if it's solely about the hardware safety.

 \ /
  Last update: 2019-05-08 15:29    [W:0.127 / U:6.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site