lkml.org 
[lkml]   [2019]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1] dmaengine: tegra-apb: Handle DMA_PREP_INTERRUPT flag properly
From
Date
08.05.2019 12:24, Jon Hunter пишет:
>
> On 05/05/2019 19:12, Dmitry Osipenko wrote:
>> The DMA_PREP_INTERRUPT flag means that descriptor's callback should be
>> invoked upon transfer completion and that's it. For some reason driver
>> completely disables the hardware interrupt handling, leaving channel in
>> unusable state if transfer is issued with the flag being unset. Note
>> that there are no occurrences in the relevant drivers that do not set
>> the flag, hence this patch doesn't fix any actual bug and merely fixes
>> potential problem.
>>
>> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
>
> From having a look at this, I am guessing that we have never really
> tested the case where DMA_PREP_INTERRUPT flag is not set because as you
> mentioned it does not look like this will work at all!
>
> Is there are use-case you are looking at where you don't set the
> DMA_PREP_INTERRUPT flag?

No. I just noticed it while was checking whether we really need to
handle the BUSY bit state for the Ben's "accurate reporting" patch.

> If not I am wondering if we should even bother supporting this and warn
> if it is not set. AFAICT it does not appear to be mandatory, but maybe
> Vinod can comment more on this.

The warning message will be also okay if it's not mandatory.

\
 
 \ /
  Last update: 2019-05-08 14:38    [W:0.063 / U:10.880 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site